£1,996 £1,663.33 + vat
save 20% was £2495
save £499
1 in stock online Next working day delivery available
We are rated Excellent on TrustpilotOver 1,100 five star reviews from happy customers
Next working day delivery availableIn-stock items only, order by 2pm Mon to Fri
If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.
We are proud to be the official UK & Ireland Poolstar distribution partner.
This Remora Professional 8kW heat pump is an ex-demonstration model, the unit has marks and scratches to the cabinet and obvious signs of use, the damage is cosmetic only and as you can see from the photos the rest of the heat pump is undamaged.
The unit is sold as seen so please look at the photos carefully, if you have any questions about this unit, please contact our sales team and ask for Simon or Shell.
Wide range of set points from 5°C to 40°C (according to application)
1°C differential to restart
13A RCD plug on 8kW, 10kW and 14kW models allows you to plug units directly into outside sockets without need for additional electrical connections
Inverter model is suitable for all year round heating / cooling
Remote input for external third party thermostatic management, for example RS PRO On/Off Temperature Controller
Learn more with our handy sizing guide, find out what kW heat pump you require for your pool or pond
Two year parts and labour warranty and ten years on compressor and heat exchanger (parts only after year two)
Wi-Fi connectivity built-in – requires iOS / Android ‘Smart Life’ App (requires Wi-Fi network with suitable signal strength)
Preset modes; Boost mode maintains high heat output for fastest heating, Silent mode for night time running, Eco mode for most efficient running and the intelligent Smart mode for maximum flexibility
User-friendly high end touch screen controller, flush fitting colour LCD – watch video
High quality matt finish powder coated galvanised steel casing with integral fan outlet and heat exchanger inlets
Comes fitted with 2.8m mains cable and UK RCD plug
Power usage log shows how much energy has been consumed in each running mode
Advanced Parameters for full control of heat pump settings, running status and fault history
Automatic software update via internet (no need for engineer to callout to update)
External Control allows remote access to diagnostics and parameters for resolving setup issues and potential fault finding
Timer operation and secondary Silent mode timer, ideal for night time running
Heats and cools, set temperature selectable from 5°C to 40°C
Extended season model works down to -15°C, automatic hot gas defrosting
1½ inch / 50mm female glue socket water connections
High efficiency performance with advanced stepless DC inverter system that automatically controls the running speed of the compressor and the fan
Low noise airstream design for very quiet operation, average sound level <30 dB(A) at 10 metres
Stepless twin rotary inverter compressor and DC brushless fan motor
EEV throttling technology adjusts the gas flow and increases COP by up to 20%
Spiral Titanium heat exchanger is 40% more efficient than standard titanium heat exchanger
R32 gas for environmentally friendly operation
Winter cover included (excluding Professional 35)
Heating Capacity A27/W27 |
4.2 ~ 8.6 kW |
Max. Input Power |
0.48 ~ 1.21 kW |
Heating Capacity A15/W26 |
2.4 ~ 5.75 kW |
Max. Input Power |
0.45 ~ 1.15 kW |
Max. Current |
7.5A |
Minimum Fuse (C Type MCB) |
2.8m cable, RCD and UK plug fitted |
COP A27/W27 |
7.15 ~ 16.58 |
COP A15/W26 |
5.02 ~ 8.16 |
Voltage |
230V |
Compressor |
GMCC (Midea/Toshiba) |
Refrigerant |
R32 |
Noise Level (10m) |
<29db |
Nominal Flow |
3~5m³/h |
Water Connections |
1½ inch |
Dimensions (L x W x H) |
870mm x 380mm x 653mm |
Weight |
43Kg |
Wi-Fi Connectivity |
Built-in* (Requires Smartphone App) |
COP stands for Coefficient of Performance
COP is quoted as a number, such as 17.55
For each kW of energy input, 17.55 x kW would be output
The higher the output, the lower the running costs
If you are thinking of heating your pool you should cover the pool when not in use as 80% of heat loss occurs through surface evaporation, a separate solar or bubble cover is a worthwhile investment if you don’t have an existing cover.
With an above ground pool it is especially important to keep it covered as these pools are not well insulated against heat loss – additional insulation around the sides and bottom of an above-ground pool can help to retain valuable heat – in fact properly insulating your pool can extend your season or even reduce the size of heat pump required.
The 8kW, 10kW and 14kW Professional models come fitted with a 2.8m mains cable, RCD and plug as standard, making them suitable for outdoor sockets, this cable can be removed and the unit can be hardwired if required.
The other heat pumps in the Professional range will require electrical installation by a qualified electrician, the use of a Miniature Circuit Breaker, slow type (C or D curve) is recommended. Full installation guidelines can be found in the user manual including the required cable size.
The electrical connection marked water pump should not to be used for connecting your pump if using a sand filter as flow protection on the heat pump will switch the power off preventing backwash operation (flow is reversed during backwashing).
Water inlet and outlet connections are 1½ inch / 50mm female glue sockets across the range, the supplied unions can accept optional hose tails for connecting 32mm or 38mm flexible hose.
If the flow rate through your heat pump is too high it can take longer to heat your pool or you may struggle to achieve your desired temperature, our bypass kit for above ground pools optimises the flow rate to maximise the heat transfer to your pool water. A bypass kit also allows the circulation and filtering of pool water without heating and for winterising your heat pump.
The Remora Professional features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smart device from anywhere in the world. The Smart Life App is available for both iOS and Android smart devices.
The Smart Life App can be used to view the current pool water temperature, adjust the desired temperature, switch between modes, set the timer, turn the heat pump on and off remotely and to view the operating status, energy logs and all parameters.
Inverter heat pumps use a variable speed compressor motor, the motor speeds up and slows down as needed to achieve and maintain the required temperature, the result is that the desired temperature will be reached more quickly and maintained more efficiently than a fixed speed motor.
Fixed speed motors reach the desired temperature more slowly as the output is fixed, once the temperature is reached they maintain the temperature by switching the motor on and off. By varying the output an inverter heat pump can speed up the time taken to achieve the initial temperature and thereafter maintain a constant temperature without the need to keep stopping and starting the compressor to control output.
Our range of Remora Professional pool heat pumps have an average C.O.P. of 17.55, meaning that for each kW of energy consumed up to 17.55kW of heat is transferred to your pool (dependent on both air and water temperature). Inverter technology avoids the power wastage of fixed speed motors, making an inverter heat pump more energy efficient and quieter to run.
Your Remora Professional swimming pool heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.
The manufacturer literature may state that the heat pump should be positioned above the waterline, the assumption being that pools are in-ground, therefore the heat pump would sit at ground level.
If you have an above-ground pool please position your heat pump at ground level (therefore below the waterline), there is no need to elevate the heat pump.
