Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Product code: 117995 Categories: , Tag: View more products from...

Overview

The Poolex Ice Spa 5kW Full Inverter heat pump uses EVI compressor technology to reduce energy consumption by up to 75% compared to standard electric heaters, while maintaining strong efficiency at low temperatures, outputting an impressive 3.1kW of heat at air temperature -10°C.

Compatible with all hot tubs, swim spas, and Nordic baths, this easy to install unit delivers exceptional performance in extreme weather, it will continue to work in outside temperatures as low as -25°C. It also features a detachable colour touchscreen alongside Wi-Fi control and a programmable timer via the Smart Life app for iOS and Android.

Highlights

Up to 5.2kW of heat output at air 26°C and water 26°C, 4.39kW of heat at air 15°C and water 38°C and 3.1kW of output at air -10°C and water 38°C

Full Inverter & EVI efficiency, reversible hot/cold for ultimate flexibility, heating from 15-43°C and cooling from 5-43°C with Chiller function, operates down to -25°C, with automatic defrost

Integrated control of the spa / hot tub heater with supplied 230v relay

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Specifications

Heating Capacity A26/W26
 2.95~5.2kW
Power Consumption
 0.34~0.67kW
COP
 8.6~7.6
Heating Capacity A15/W38
 2.05~4.39kW
Power Consumption
 0.4~0.67kW
COP
 5.1~4.7
Heating Capacity A-10/W38
 0.97-3.1kW
Power Consumption
 0.36~1.38kW
COP
 2.64-2.24
Maximum Power
 2.1kW
Voltage
 230v
Noise Level (10m)
 <35dB(A)
Refrigerant
 R32
Water Connections
 32-38mm
Nominal Flow
 2.15 m³/h
Dimensions (L x W x H)
 540mm x 490mm x 430mm
Weight
 42Kg

Setup & Advice

Electrical

All models are fitted with a mains cable, RCD and plug as standard, making them suitable for outdoor sockets.

Water inlet and outlet connections are 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The Ice Spa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

Wi-Fi

The Ice Spa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Positioning

Your Poolex Ice Spa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the Ice Spa should be disconnected and stored in a shed or garage if not in use for extended periods.

The Poolex Ice Spa comes with the following warranty package:

3 Year full warranty

7 Year parts warranty on the compressor

15 Year parts warranty on the titanium heat exchanger

Parts only after year 3, warranty covers manufacturing defects only

Important: Damage caused by frost is not covered by the warranty, please make sure you correctly winterise your heat pump and drain all residual water during periods of non-usage

What is COP?

COP stands for Coefficient of Performance. Simply put, it is a ratio that tells you how much heat you return to your pool for every unit of electricity you pay for.

How it Works

If a heat pump has a COP of 5.0 it means: input 1kW of electricity, output 5kW of heat, you are essentially getting 4kW of free heat extracted from the ambient air.

Why Air Temperature Matters

Heat pumps are aerothermal, meaning they pull heat from the surrounding air, because of this, the COP changes based on the weather.

Warm weather (e.g. >24°C), the air is full of heat energy, making it easy for the pump to achieve a high COP (like 5.0 or higher).

Cooler weather (e.g. <15°C), there is less heat available in the air. The pump has to work harder, which lowers the COP and reduces the total heat returned to your pool.

Expert Tip: When choosing a heat pump, don't just look at it's maximum COP, consider the air temperatures during your specific swimming season. A pump that is powerful enough for July might struggle in May or September.

You can refer to our Heat Pump Sizing Guide to ensure you select the correct capacity for your pool size and desired swimming season.

Documents

Poolex Trade product

Product code: 117995 Categories: , Tag: View more products from...

Poolex Ice Spa 5kW Inverter Heat Pump for Spas and Hot Tubs

Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Product code: 117995 Categories: , Tag: View more products from...

Overview

The Poolex Ice Spa 5kW Full Inverter heat pump uses EVI compressor technology to reduce energy consumption by up to 75% compared to standard electric heaters, while maintaining strong efficiency at low temperatures, outputting an impressive 3.1kW of heat at air temperature -10°C.

Compatible with all hot tubs, swim spas, and Nordic baths, this easy to install unit delivers exceptional performance in extreme weather, it will continue to work in outside temperatures as low as -25°C. It also features a detachable colour touchscreen alongside Wi-Fi control and a programmable timer via the Smart Life app for iOS and Android.

Highlights

Up to 5.2kW of heat output at air 26°C and water 26°C, 4.39kW of heat at air 15°C and water 38°C and 3.1kW of output at air -10°C and water 38°C

Full Inverter & EVI efficiency, reversible hot/cold for ultimate flexibility, heating from 15-43°C and cooling from 5-43°C with Chiller function, operates down to -25°C, with automatic defrost

Integrated control of the spa / hot tub heater with supplied 230v relay

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Specifications

Heating Capacity A26/W26
 2.95~5.2kW
Power Consumption
 0.34~0.67kW
COP
 8.6~7.6
Heating Capacity A15/W38
 2.05~4.39kW
Power Consumption
 0.4~0.67kW
COP
 5.1~4.7
Heating Capacity A-10/W38
 0.97-3.1kW
Power Consumption
 0.36~1.38kW
COP
 2.64-2.24
Maximum Power
 2.1kW
Voltage
 230v
Noise Level (10m)
 <35dB(A)
Refrigerant
 R32
Water Connections
 32-38mm
Nominal Flow
 2.15 m³/h
Dimensions (L x W x H)
 540mm x 490mm x 430mm
Weight
 42Kg

Setup & Advice

Electrical

All models are fitted with a mains cable, RCD and plug as standard, making them suitable for outdoor sockets.

Water inlet and outlet connections are 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The Ice Spa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

Wi-Fi

The Ice Spa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Positioning

Your Poolex Ice Spa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the Ice Spa should be disconnected and stored in a shed or garage if not in use for extended periods.

The Poolex Ice Spa comes with the following warranty package:

3 Year full warranty

7 Year parts warranty on the compressor

15 Year parts warranty on the titanium heat exchanger

Parts only after year 3, warranty covers manufacturing defects only

Important: Damage caused by frost is not covered by the warranty, please make sure you correctly winterise your heat pump and drain all residual water during periods of non-usage

What is COP?

COP stands for Coefficient of Performance. Simply put, it is a ratio that tells you how much heat you return to your pool for every unit of electricity you pay for.

How it Works

If a heat pump has a COP of 5.0 it means: input 1kW of electricity, output 5kW of heat, you are essentially getting 4kW of free heat extracted from the ambient air.

Why Air Temperature Matters

Heat pumps are aerothermal, meaning they pull heat from the surrounding air, because of this, the COP changes based on the weather.

Warm weather (e.g. >24°C), the air is full of heat energy, making it easy for the pump to achieve a high COP (like 5.0 or higher).

Cooler weather (e.g. <15°C), there is less heat available in the air. The pump has to work harder, which lowers the COP and reduces the total heat returned to your pool.

Expert Tip: When choosing a heat pump, don't just look at it's maximum COP, consider the air temperatures during your specific swimming season. A pump that is powerful enough for July might struggle in May or September.

You can refer to our Heat Pump Sizing Guide to ensure you select the correct capacity for your pool size and desired swimming season.

Documents

Product code: 117995 Categories: , Tag: View more products from...

Poolex Ice Spa 5kW Inverter Heat Pump for Spas and Hot Tubs

Product code: 117995 Categories: , Tag: View more products from...

Poolex Ice Spa 5kW Inverter Heat Pump for Spas and Hot Tubs

Call for price and availability

Trade enquiries

We are proud to be the official UK & Ireland distribution partner for Poolstar brands, including Poolex pool equipment, Spawer spa heat pumps, Holl's saunas, NetSpa inflatable ice baths and Formidra solar showers.

Poolstar 2026 Catalogue

Contact us for advice on product selection, wholesale enquiries including opening an account, trade prices, stock availability and technical support.

01284 658770

Poolstar Family of Brands
Product code: 117995 Categories: , Tag: View more products from...

Overview

The Poolex Ice Spa 5kW Full Inverter heat pump uses EVI compressor technology to reduce energy consumption by up to 75% compared to standard electric heaters, while maintaining strong efficiency at low temperatures, outputting an impressive 3.1kW of heat at air temperature -10°C.

Compatible with all hot tubs, swim spas, and Nordic baths, this easy to install unit delivers exceptional performance in extreme weather, it will continue to work in outside temperatures as low as -25°C. It also features a detachable colour touchscreen alongside Wi-Fi control and a programmable timer via the Smart Life app for iOS and Android.

Highlights

Up to 5.2kW of heat output at air 26°C and water 26°C, 4.39kW of heat at air 15°C and water 38°C and 3.1kW of output at air -10°C and water 38°C

Full Inverter & EVI efficiency, reversible hot/cold for ultimate flexibility, heating from 15-43°C and cooling from 5-43°C with Chiller function, operates down to -25°C, with automatic defrost

Integrated control of the spa / hot tub heater with supplied 230v relay

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Specifications

Heating Capacity A26/W26
 2.95~5.2kW
Power Consumption
 0.34~0.67kW
COP
 8.6~7.6
Heating Capacity A15/W38
 2.05~4.39kW
Power Consumption
 0.4~0.67kW
COP
 5.1~4.7
Heating Capacity A-10/W38
 0.97-3.1kW
Power Consumption
 0.36~1.38kW
COP
 2.64-2.24
Maximum Power
 2.1kW
Voltage
 230v
Noise Level (10m)
 <35dB(A)
Refrigerant
 R32
Water Connections
 32-38mm
Nominal Flow
 2.15 m³/h
Dimensions (L x W x H)
 540mm x 490mm x 430mm
Weight
 42Kg

Setup & Advice

Electrical

All models are fitted with a mains cable, RCD and plug as standard, making them suitable for outdoor sockets.

Water inlet and outlet connections are 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The Ice Spa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

Wi-Fi

The Ice Spa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Positioning

Your Poolex Ice Spa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the Ice Spa should be disconnected and stored in a shed or garage if not in use for extended periods.

The Poolex Ice Spa comes with the following warranty package:

3 Year full warranty

7 Year parts warranty on the compressor

15 Year parts warranty on the titanium heat exchanger

Parts only after year 3, warranty covers manufacturing defects only

Important: Damage caused by frost is not covered by the warranty, please make sure you correctly winterise your heat pump and drain all residual water during periods of non-usage

What is COP?

COP stands for Coefficient of Performance. Simply put, it is a ratio that tells you how much heat you return to your pool for every unit of electricity you pay for.

How it Works

If a heat pump has a COP of 5.0 it means: input 1kW of electricity, output 5kW of heat, you are essentially getting 4kW of free heat extracted from the ambient air.

Why Air Temperature Matters

Heat pumps are aerothermal, meaning they pull heat from the surrounding air, because of this, the COP changes based on the weather.

Warm weather (e.g. >24°C), the air is full of heat energy, making it easy for the pump to achieve a high COP (like 5.0 or higher).

Cooler weather (e.g. <15°C), there is less heat available in the air. The pump has to work harder, which lowers the COP and reduces the total heat returned to your pool.

Expert Tip: When choosing a heat pump, don't just look at it's maximum COP, consider the air temperatures during your specific swimming season. A pump that is powerful enough for July might struggle in May or September.

You can refer to our Heat Pump Sizing Guide to ensure you select the correct capacity for your pool size and desired swimming season.

Documents