Key features
Single brush scrubs away dirt and bacteria
Cleans pool floor and walls – Poolstyle Advanced also cleans waterline
Suitable for small in-ground and framed above ground pools (not splasher style) up to 10m in length
Lightweight and easy to handle
Effective, easy-to-use fine filtration system
Efficient dirt collection – Collects fine and rough debris
Top-access fine filtration system – easy to remove and clean
Fast, debris-free water release
24 months warranty on all parts (excluding brushes & filters)
Downloads
Quickstart Guide (.pdf)
Manual (.pdf)
Specifications
Pool Size |
Up to 10m length |
Surfaces |
Floor & walls only |
Cycle Time |
2 hours |
Cable |
15 metres |
Brushes |
1 x PVC |
Weight |
6.6Kg |
Motor Voltage |
24VDC |
Filtration |
Easy-clean fine net canister |
Power Supply |
30VDC, IP54 |
Suction Rate |
15m³ per hour |
Warranty |
2 years |
A note about algae
Robot pool cleaners will not fully remove algae from your pool
Cleaners may not climb algae covered surfaces
Algae should always be treated and removed manually before using a robot cleaner
Used regularly a robot cleaner can help to prevent the regrowth of algae alongside filtration and correct water chemistry
Will the Poolstyle Plus work in my pool?
Maximum pool length |
10m |
In-ground pools |
Yes |
Above-ground framed pools |
Yes |
Wooden pools |
Yes |
Liner pools |
Yes |
Rough tiled pools |
Yes |
Fibreglass pools |
Yes |
Coated concrete pools |
Yes |
Stainless steel pools |
No |
Smooth tiled pools |
No |
Technical data
Low voltage 24v motor (transformer included) – low energy consumption
Automatic shut off at end of cycle time
Motor protection mechanism in case of over load and out of water
Motor protection IP68
Chlorine Max 4 ppm / NaCI Max 5000 ppm
pH 7.0 – 7.8
Temperature 6 – 34°C
Minimum depth 0.8m / Maximum depth 5.0m