Highlights
Integrated vertical float switch operates entirely inside the casing to prevent sticking in narrow spaces down to 20cm by 20cm
Low suction capability draws standing water down to a minimal depth of 2mm to 3mm when switched into manual override mode
Sliding inspection cover allows quick access for cleaning debris away from the internal float mechanism without dismantling the unit
Continuous duty asynchronous motor features thermal overload protection and stays cooled even when only partially submerged
10 metre mains cable and UK plug (cable only on 110v pump)
1¼ inch top discharge, includes four-step hose tail
Specifications
Model |
200M |
Operation |
Automatic (integral float) |
Float Start Height |
165mm |
Float Stop Height |
65mm |
Flowrate Max. |
145 L/min |
Head Max. |
6m |
Impeller Type |
Vortex |
Horse Power |
0.28 HP |
Power |
0.2 kW |
Voltage |
230V |
Water Level Min. |
2/3mm |
Water Temp Max. |
35°C |
Motor Speed |
2800 RPM |
Discharge Size |
1¼ inch |
Free Passage |
5mm |
Pumped Medium |
Water & small particles up to 5mm |
Cable Length |
10m |
Construction |
Technopolymer |
Weight |
4.2 Kg |
Dimensions (H x W x L) |
400mm x 158mm x 225mm |
Model |
400M |
Operation |
Automatic (integral float) |
Float Start Height |
165mm |
Float Stop Height |
65mm |
Flowrate Max. |
180 L/min |
Head Max. |
9m |
Impeller Type |
Vortex |
Horse Power |
0.55 HP |
Power |
0.4 kW |
Voltage |
230V |
Water Level Min. |
2/3mm |
Water Temp Max. |
35°C |
Motor Speed |
2800 RPM |
Discharge Size |
1¼ inch |
Free Passage |
5mm |
Pumped Medium |
Water & small particles up to 5mm |
Cable Length |
10m |
Construction |
Technopolymer |
Weight |
5.1 Kg |
Dimensions (H x W x L) |
400mm x 158mm x 225mm |
Model |
400 |
Operation |
Automatic (integral float) |
Float Start Height |
165mm |
Float Stop Height |
65mm |
Flowrate Max. |
180 L/min |
Head Max. |
9m |
Impeller Type |
Vortex |
Horse Power |
0.55 HP |
Power |
0.4 kW |
Voltage |
110V |
Water Level Min. |
2/3mm |
Water Temp Max. |
35°C |
Motor Speed |
2800 RPM |
Discharge Size |
1¼ inch |
Free Passage |
5mm |
Pumped Medium |
Water & small particles up to 5mm |
Cable Length |
10m |
Construction |
Technopolymer |
Weight |
5.1 Kg |
Dimensions (H x W x L) |
400mm x 158mm x 225mm |
Details
Operating range: from 1 to 10m³/h with head up to 9 metres.
Liquid temperature range: from 0 °C to +35 °C for domestic use
Pumped liquid: dirty water without fibres
Pump priming limit: 10-15 mm in manual operation.
Max. immersion depth: 7 metres
Made for reliable service in damp environments, the main pump body, outer cover and suction strainer grid are moulded from water-resistant technopolymer.
The internal motor housing, drive shaft, screws and fasteners are manufactured from corrosion resistant stainless steel.
To maximise motor longevity, the design incorporates a three-fold radial lip seal setup with an intervening oil pre-chamber to completely isolate the internal electrical components from fluid ingress.
Submersible type continuous duty asynchronous motor
Stator enclosed in airtight stainless steel casing, with an outer cover that protects the wiring and the capacitor
Rotor running on permanently lubricated ball bearings, oversized to ensure low noise and durability
Built-in thermal-amperometric protection and permanently connected capacitor













