FREE delivery over £300 | Order by 2pm Mon to Fri

Product description

The IceSpa 7kW is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3.3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2.2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features Wi-Fi temperature control and a programmable timer using the dedicated Poolex App, available for iOS and Android smart devices. A colour touchscreen that can be detached from the unit (wired) can be added as an option.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Up to 7kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 4.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3.3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any type of spa, hot tub, swim spa or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 15 – 40°C, cooling range from 4 – 35°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Plug and play, comes with 4m mains cable and RCD plug (please note RCD plug will not fit outdoor sockets with covers)

32/38mm hose tail water connections, pipes and/or other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three year parts warranty, seven year parts (total) on compressor and 15 year corrosion (total) on Titanium coil

Downloads

Specifications

Heating Capacity A26/W26
 3.3~7kW
Power consumption
 0.28~1.4kW
COP
 5~11.9
Heating Capacity A15/W38
 2.8~4.7kW
Power consumption
 0.67~1.3kW
COP
 3.7~4.2
Heating Capacity A-10/W38
 2.2~3.3kW
Power consumption
 1.2~1.5kW
COP
 1.8~2.1
Maximum Power
 1.7kW
Voltage
 230v
Noise Level (10m)
 <28dB(A)
Refrigerant
 R32
Water Connections
 1″ male / 32-38mm
Nominal Flow
 3m³/h
Dimensions (L x W x H)
 710mm x 490mm x 500mm

What is COP?

COP stands for Coefficient of Performance

COP is quoted as a number, such as 7

For each kW of energy input, 7 x kW would be output

The higher the output, the lower the running costs

Installation

Connections

All models are fitted with a 4m mains cable and RCD plug as standard (please note RCD plug will not fit outdoor sockets with covers).

Water inlet and outlet connections are 1 inch / 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The IceSpa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

The IceSpa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Your Poolex IceSpa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the IceSpa should be disconnected and stored in a shed or garage if not in use for extended periods.

Product Description

The IceSpa 7kW is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3.3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2.2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features Wi-Fi temperature control and a programmable timer using the dedicated Poolex App, available for iOS and Android smart devices. A colour touchscreen that can be detached from the unit (wired) can be added as an option.

We Are Rated Excellent on TrustPilot
Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App

Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs

Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App

Product description

The IceSpa 7kW is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3.3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2.2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features Wi-Fi temperature control and a programmable timer using the dedicated Poolex App, available for iOS and Android smart devices. A colour touchscreen that can be detached from the unit (wired) can be added as an option.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Up to 7kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 4.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3.3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any type of spa, hot tub, swim spa or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 15 – 40°C, cooling range from 4 – 35°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Plug and play, comes with 4m mains cable and RCD plug (please note RCD plug will not fit outdoor sockets with covers)

32/38mm hose tail water connections, pipes and/or other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three year parts warranty, seven year parts (total) on compressor and 15 year corrosion (total) on Titanium coil

Downloads

Specifications

Heating Capacity A26/W26
 3.3~7kW
Power consumption
 0.28~1.4kW
COP
 5~11.9
Heating Capacity A15/W38
 2.8~4.7kW
Power consumption
 0.67~1.3kW
COP
 3.7~4.2
Heating Capacity A-10/W38
 2.2~3.3kW
Power consumption
 1.2~1.5kW
COP
 1.8~2.1
Maximum Power
 1.7kW
Voltage
 230v
Noise Level (10m)
 <28dB(A)
Refrigerant
 R32
Water Connections
 1″ male / 32-38mm
Nominal Flow
 3m³/h
Dimensions (L x W x H)
 710mm x 490mm x 500mm

What is COP?

COP stands for Coefficient of Performance

COP is quoted as a number, such as 7

For each kW of energy input, 7 x kW would be output

The higher the output, the lower the running costs

Installation

Connections

All models are fitted with a 4m mains cable and RCD plug as standard (please note RCD plug will not fit outdoor sockets with covers).

Water inlet and outlet connections are 1 inch / 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The IceSpa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

The IceSpa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Your Poolex IceSpa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the IceSpa should be disconnected and stored in a shed or garage if not in use for extended periods.

Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs

We Are Rated Excellent on TrustPilot

Poolex IceSpa 7kW Inverter Heat Pump for Spas and Hot Tubs

POA

Payment methods

Payment methods we accept

This product is ONLY available to trade customers.

For more information on the full Poolstar pool, spa and wellness range or to speak to us about becoming a stockist please call 01284 658770 or email our sales team.

We are proud to be the official UK & Ireland Poolstar distribution partner.

Download the Poolstar 2025-2026 Catalogue - pdf (73Mb)

Sales and technical help

Our sales team is more than happy to advise with product selection, trade enquiries and provide technical advice.

While our servicing team is on hand to help with servicing and after sales.

01284 658770

Mon to Fri 9am to 5pm /out-of-hours voicemail

Product code: 109670 Categories: , Tag:

Product description

The IceSpa 7kW is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3.3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2.2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features Wi-Fi temperature control and a programmable timer using the dedicated Poolex App, available for iOS and Android smart devices. A colour touchscreen that can be detached from the unit (wired) can be added as an option.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Up to 7kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 4.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3.3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any type of spa, hot tub, swim spa or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 15 – 40°C, cooling range from 4 – 35°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Plug and play, comes with 4m mains cable and RCD plug (please note RCD plug will not fit outdoor sockets with covers)

32/38mm hose tail water connections, pipes and/or other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three year parts warranty, seven year parts (total) on compressor and 15 year corrosion (total) on Titanium coil

Downloads

Specifications

Heating Capacity A26/W26
 3.3~7kW
Power consumption
 0.28~1.4kW
COP
 5~11.9
Heating Capacity A15/W38
 2.8~4.7kW
Power consumption
 0.67~1.3kW
COP
 3.7~4.2
Heating Capacity A-10/W38
 2.2~3.3kW
Power consumption
 1.2~1.5kW
COP
 1.8~2.1
Maximum Power
 1.7kW
Voltage
 230v
Noise Level (10m)
 <28dB(A)
Refrigerant
 R32
Water Connections
 1″ male / 32-38mm
Nominal Flow
 3m³/h
Dimensions (L x W x H)
 710mm x 490mm x 500mm

What is COP?

COP stands for Coefficient of Performance

COP is quoted as a number, such as 7

For each kW of energy input, 7 x kW would be output

The higher the output, the lower the running costs

Installation

Connections

All models are fitted with a 4m mains cable and RCD plug as standard (please note RCD plug will not fit outdoor sockets with covers).

Water inlet and outlet connections are 1 inch / 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The IceSpa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

The IceSpa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Your Poolex IceSpa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the IceSpa should be disconnected and stored in a shed or garage if not in use for extended periods.

Over 1,100 reasons why customers choose us

We have over 1,000 five star reviews on TrustPilot, below is some of our most recent customer feedback.

You can trust us when we say we care about the service we provide both before and after your purchase, there are hundreds more five star reviews from happy customers on our Trustpilot page.
We have over 1,000 reviews on Trustpilot - read our customer reviews

Read our TrustPilot reviews

★ ★ ★ ★ ★

First Class Service

Celia Howat (Verified purchase)

My experience with Automated Enviromental Systems has been over a couple of years. The quality of service and products purchased excellent. Whether I seek advice on heat pumps, water pumps, salt, alkaline issues, general pool health this company delivers. I am not technical minded and I have purchased several products from this company after they have discussed what I need... one pool heater to be returned without issue. I cannot thank Simon and various team members on the service, in particular follow up calls. This company comes highly recommended.

★ ★ ★ ★ ★

Complete satisfaction…

Karen Redfern (verified purchase)

Simon understood our requirements- designed the solution - completed the order swiftly- engineers on site within the week- job completed without any issue- what appeared difficult they resolved efficiently and could not have been more helpful in completing to our full satisfaction.

★ ★ ★ ★ ★

Excellent company to deal with

Gail Roberts (organic review)

From beginning to end AES made this easy and kept me informed through out the process. The team that came to clean the drainage chamber did a brilliant job considering the scale of the work required. Excellent company to deal with, great communication and reasonably priced. This will now be my go to company for any drainage requirements I may have.

★ ★ ★ ★ ★

Good, old fashioned customer service

Terence (verified purchase)

Good, old-fashioned customer service. You get to speak to a human who is knowledgeable, listens, understands and advises expertly. The kit I bought was exactly what I needed, and recommended by AES.

★ ★ ★ ★ ★

Responsive, professional, knowledgeable and helpful

Louise Woodward (verified purchase)

Every time we ask for help these guys are just brilliant. This time I sent in a photo of a broken part as I had no idea what it was called. Incredibly helpful. Thank you!