Wi-Fi Link makes it easy to set up Wi-Fi access in your garden and around the pool.

Connect all your Wi-Fi pool devices such as your heat pump, circulation pump, pool robot or lights, water treatment system, and even any other devices that need a Wi-Fi connection.

Enjoy the power of 4G by inserting a Nano-SIM card into your Poolex Wi-Fi Link, or connect it to your internet router or Wi-Fi repeater via a cable. You’ll then have a Wi-Fi access point and a high-quality connection all around your pool.

Plug in your Wi-Fi Link’s power supply, insert a Nano-SIM card or connect it with an ethernet cable to your box to activate its Wi-Fi access point. Then connect all your products very easily using the Wi-Fi code.

• Connect up to 25 devices
  All your pool’s connected objects, and much more
• Long range from 20 to 50 metres
  To cover a large area around your pool area
• Dual function Wi-Fi antenna and 4G router
  Connect all your objects to Wi-Fi via your internet box with a cable, or in 4G with a Nano-SIM card
• Offers speeds of up to 150Mbps
  Wi-Fi Link deploys a 2.4GHz Wi-Fi signal and offers a high-quality connection
• Waterproof standard IPX6
  Your Wi-Fi Link is protected from moisture and splashes for outdoor installation

The NEW Wi-Fi companion for your pool

For more information on how the Poolex Wi-Fi Link can connect your customers pool products to their home network or a 4G signal, contact Simon or Adam on 01284 658770 or email [email protected]

The new generation of Poolex heat pumps have SCOP ratings as well as the traditional COP ratings, but what is SCOP and how does it vary from COP?

The Coefficient of Performance (COP) measures the heating efficiency at a specific moment. It’s the ratio of the energy output to the energy input, essentially showing how much heat is produced per unit of energy consumed.

Most manufacturers typically quote the COP of air source heat pumps, however these values are based on specific air and water temperatures.

The heat pump’s COP will vary according to the actual water temperature, the rate of heat loss and importantly, outside temperature, COP decreases in colder conditions.

Whereas SCOP is the ratio of the total amount of heat delivered divided by the total amount of energy consumed over a period of time.

A SCOP rating accounts for temperature fluctuations, offering a comprehensive measure of annual energy performance.

The Seasonal Coefficient of Performance (SCOP) provides a more realistic picture of a heat pump’s efficiency over an entire heating season.

The Vertigo Fi is an ultra-quiet, vertically-ventilated heat pump featuring optimised Full Inverter technology with SCOP A.

The vertical design and upward airflow requires a reduced discharge area, meaning the Vertigo can be installed in a restricted space.

This revamped new generation combines performance, reliability, and energy efficiency, while providing optimal acoustic comfort.

Manage your Vertigo remotely via Wi-Fi and the Poolex app, and receive maintenance notifications for optimum monitoring thanks to it’s connection to the Poolex Cloud.

The NEW benchmark in vertical heat pumps

For more information on how the Poolex Vertigo can help your customers increase the performance, reliability, and energy efficiency of their pool heating, contact Simon or Adam on 01284 658770 or email [email protected]

The Award-winning IceSpa from Poolex is a heat pump for spas is designed to operate in extreme climates, down to -25°C.

The IceSpa was recently awarded the Gold Standard in the Spa Product of the Year category at the UK Pool and Spa Awards 2024.

The IceSpa allows you to heat a spa while reducing energy consumption by up to 75% thanks to Full Inverter technology.

Easy to install, it is compatible with all types of spas, swim spas, and Nordic baths.

Ultimate solution to reduce spa running costs

For more information on how Poolex Spawer Spa heat pumps can help reduce the running costs on spas and hot tubs, contact Simon or Adam on 01284 658770 or email [email protected]

The Saci E-Joy frequency inverter allows savings of up to 70% on pump running costs with the programming of up to four daily filtration cycles with different operating speeds for each cycle.

This ability to vary the speed of the pump motor leads to considerable energy savings and reduced running costs, an added benefit is much quieter operation, at lower motor speeds the operation of pumps is barely noticeable.

The E-Joy is a versatile unit and will work with any single phase pool pump on the market, up to 1.1kW or 1.5HP, and is easily mounted using the included wall bracket.

Set up is extremely simple and the easy start assistant needs just a few parameters to have your pump fully operational.

Our MD Simon and Sales Manager Adam attended The UK Pool & Spa Awards 2024 in Birmingham on Thursday 5th December.

We were thrilled to accept three awards on behalf of Poolstar, we recently announced that we have officially secured a distribution agreement for Poolex products in the UK with Poolstar.

Poolstar received the Gold Standard in the Energy Efficient / ECO Award category for their Poolex Jet Pro heat Pump, the Gold Standard in the Spa Product of the Year Award category for the Poolex SPAWER Ice Spa heat pump and the Gold Standard in the Pool Product of the Year category for the Poolex Aqualyser.

We enjoyed a brilliant night, and we are already looking forward to the 2025 UK Pool & Spa Awards!

We are really pleased to welcome new engineers, Fred and Frank, to the AES family. The guys will be responsible for servicing customers’ pumping stations across East Anglia.

Automated Environmental Systems provide preventative servicing, emergency response breakdown and repairs for sewage pumping stations, stormwater pumping stations and effluent pumping stations.

• Regular servicing extends the life of pumping stations
• Equipment is maintained to manufacturer’s guidelines
• Full service report and certificate after each visit
• Advice on how to look after your pumping station
• Most common spare parts carried on engineer’s vehicle

We offer full on-site servicing and repairs on all types of pumping stations and pumping equipment throughout the UK. All our engineers are confined space trained and our vehicles carry all necessary Health and Safety equipment to ensure we are suitably equipped for every job.

For more information on our servicing please get in touch with the team on 01284 658770 or email [email protected]

Taking pool heating to the next level

Automated Environmental Systems have recently signed a deal to become the new UK distribution partner for Poolstar products.

For more information on how the Poolex JetPRO and JetMAX can help your customers heat their pool water, contact Simon or Adam on 01284 658770 or email [email protected]

The Variline from Poolex reduces energy consumption by automatically adjusting its flow rate according to your pool’s needs.

Your filter pump transfers water from your pool through the filter and your heat pump. However, output levels can vary depending on swimming periods and pool treatment.

Running a variable-speed pump at 50% for 24 hours instead of an on/off pump for 8 hours saves around 80% of the energy.

The NEW Variline features Wi-Fi capability, the Poolex App and Poolex Cloud allow for remote control and monitoring.

Dive into increased pool energy efficiency

Automated Environmental Systems have recently signed a deal to become the new UK distribution partner for Poolstar products.

For more information on how the Poolex Variline can help your customers reduce their pool running costs, contact Simon or Adam on 01284 658770 or email [email protected]

This precise system ensures consistently clean and healthy water with simplified and efficient management.

Equipped with a redox probe, it continuously measures the disinfectant level and automatically adjusts the gas chlorine production according to the actual needs of the pool.

A pH probe monitors the water’s pH level and regulates the pump to maintain perfect balance.

Power up your pool treatment

Automated Environmental Systems have recently signed a deal to become the new UK distribution partner for Poolstar products.

For more information on how the Poolex Aqualyser can help your customers keep their pool water clean and healthy, contact Simon or Adam on 01284 658770 or email [email protected]

It’s that time of year when your Remora heat pump may need to use the built-in anti-freeze protection. We receive calls from customers asking what the message on the controllers of the F and I models means, our resident heat pump ‘guru’ and MD Simon has written this quick guide to understanding how the anti-freeze system works for the fixed speed and Inverter heat pumps.

The Remora F and I model heat pumps have two levels of anti-freeze protection.

The logic on each unit is slightly different, one being a fixed-speed unit and the other being an inverter.

The control logic for the fixed speed range is shown below: P17 Message on the controller

If the inlet water temperature is 4°C or below and the ambient temperature is 2°C or below, the unit will enter the 1st level of anti-freeze and start running the water pump to prevent water in the pipes from freezing. When the ambient temperature is above 4°C the heat pump will exit the anti-freeze mode.

If the inlet water temperature is 2°C or below and the ambient temperature is 2°C or below, the unit will enter the 2nd level of anti-freeze and start running the heat pump to heat the water. Once the inlet water temperature exceeds 3°C the heat pump will exit the anti-freeze mode.

However anti-freeze protections will still be triggered by water and ambient air temps.

The control logic for the Inverter range is shown below: EE04 Message on the controller

If the inlet water temperature is lower than 15°C and the ambient temperature is 0°C or below, the unit will enter the 1st level of anti-freeze, and start running the water pump. When the inlet water temperature exceeds 15°C or the ambient temperature is above 2°C, the heat pump will exit anti-freeze mode.

If the inlet water temperature is lower than 2°C and the ambient temperature is 0°C or below, the unit will enter the 2nd level of anti-freeze, and start running the heat pump to heat the water. Once the inlet water temperature exceeds 15°C or the ambient temperature is 2°C or above, the heat pump will exit anti-freeze mode.

However anti-freeze protections will still be triggered by water and ambient air temps.

The Poolex Cloud marks a turning point in pool management.

Powered by artificial intelligence and advanced data analytics, this platform revolutionises professional maintenance by making it more efficient and proactive.

Optimise performance and anticipate the future with this innovative solution that takes pool management to the next level.

Remote diagnostics

• Check or correct settings remotely
• Identify breakdowns
• Avoid unnecessary travel
• Reduce heat pump downtime
• Eventually, become proactive

Remote management

• Know the status of your customers’ heat pumps
• Analyse quality
• Analyse uses and needs
• Fuelling R&D to work on innovation and continuous improvement

Who are Poolex?

After years of focusing primarily on heat pumps, owner of the Poolex brand, Poolstar, is now expanding its offering to provide complete solutions that cover the entire technical room equipment as well as a diverse range of wellness products.

This expansion marks a turning point for Poolstar, guided by strong values.

Poolex equipment is designed to meet the highest technical standards, ensuring efficiency and reliability in all conditions. Every product is crafted with meticulous attention, guaranteeing optimal durability and heightened satisfaction. Moreover, by incorporating more sustainable practices and materials, Poolstar are reducing their products’ ecological footprint while supporting you in managing your installations more responsibly.

Power up your pool management

For more information on how the Poolex Cloud and the new range of Poolex Cloud connected products can help you remotely manage your customers’ pools, contact Simon or Adam on 01284 658770 or email [email protected]

Automated Environmental Systems recently secured a distribution agreement for Poolex products in the UK with Poolstar.