Key features
Manual mode, intake from 15 mm and suction down to 1 mm
Automatic mode, with electronic probe attached, switch-on point approx. 25mm, switch-off point approx. 3mm
Vertical 1 inch male threaded outlet with integrated non-return valve
Suitable for cellars, washhouses, pools, manholes and where water must be pumped out ‘completely’
10m power cable and plug
Free passage 1mm
Supplied with electronic level control with four stainless steel electrodes and fixing bracket
The longest probe is the ground, the next is the switch-off probe, then the activation probe and the shortest probe is the alarm
Probe housing contains buzzer alarm
Downloads
Specifications (.pdf)
Manual (.pdf)
Specifications
Flowrate Max. |
90 L/min |
Head Max. |
7m |
Power |
0.30 kW |
Voltage |
230v |
Speed |
2800 RPM |
Construction |
Polypropylene / stainless steel |
Discharge Size |
1 inch |
Cable |
10m |
Pumped Medium |
Clean & Waste Water |
Free Passage |
1mm |
Weight |
3.8 Kg |
Dimensions (H x W x L) |
350mm x 187mm x 185mm (exc. probe) |
Technical data
Made from corrosion and shock-resistant polypropylene and high-grade stainless steel
Motor winding with thermal winding protection
Protection grade IP68 – fully submersible
Mechanical seal and additional shaft seal
Maximum flow up to 90 L/min
Head up to 7m
Maximum water temperature 40°C












