FREE delivery over £300 | Order by 2pm Mon to Fri

Product description

The IceSpa is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features a remote colour touchscreen that can be detached from the unit (wired) and also Wi-Fi temperature control and a programmable timer using the Smart Life App, available for iOS and Android smart devices.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Integrated remote colour touchscreen can be removed from the unit (wired)

Up to 5.38kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 3.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any spa, hot tub, swim spa, or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 10 – 40°C, cooling range from 8 – 28°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Plug and play – comes with mains cable and RCD

32/38mm hose tail water connections, pipes, and other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three-year parts warranty, seven-year parts (total) on compressor, and 15-year corrosion (total) on Titanium coil

Downloads

Specifications

Heating Capacity A26/W26
 2.5~5.38kW
Power Consumption
 0.2~1kW
COP
 5.33~13.9
Heating Capacity A15/W38
 1.8~3.7kW
Power Consumption
 0.3~1.2kW
COP
 3.01~5.6
Heating Capacity A-10/W38
 3kW
COP
 1.6
Maximum Power
 1.8kW
Voltage
 230v
Noise Level (10m)
 <32dB(A)
Refrigerant
 R32
Water Connections
 1″ male / 32-38mm
Nominal Flow
 2.31 m³/h
Dimensions (L x W x H)
 600mm x 390mm x 423mm
Weight
 32Kg

What is COP?

COP stands for Coefficient of Performance

COP is quoted as a number, such as 5

For each kW of energy input, 5 x kW would be output

The higher the output, the lower the running costs

Installation

Connections

All models are fitted with a mains cable, RCD and plug as standard, making them suitable for outdoor sockets.

Water inlet and outlet connections are 1 inch / 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The IceSpa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

The IceSpa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Your Poolex IceSpa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the IceSpa should be disconnected and stored in a shed or garage if not in use for extended periods.

Product Description

The IceSpa is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features a remote colour touchscreen that can be detached from the unit (wired) and also Wi-Fi temperature control and a programmable timer using the Smart Life App, available for iOS and Android smart devices.

We Are Rated Excellent on TrustPilot
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa Inverter Heat Pump for Spas and Hot Tubs

Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs

Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs
Poolex App
Poolex IceSpa Inverter Heat Pump for Spas and Hot Tubs

Product description

The IceSpa is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features a remote colour touchscreen that can be detached from the unit (wired) and also Wi-Fi temperature control and a programmable timer using the Smart Life App, available for iOS and Android smart devices.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Integrated remote colour touchscreen can be removed from the unit (wired)

Up to 5.38kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 3.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any spa, hot tub, swim spa, or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 10 – 40°C, cooling range from 8 – 28°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Plug and play – comes with mains cable and RCD

32/38mm hose tail water connections, pipes, and other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three-year parts warranty, seven-year parts (total) on compressor, and 15-year corrosion (total) on Titanium coil

Downloads

Specifications

Heating Capacity A26/W26
 2.5~5.38kW
Power Consumption
 0.2~1kW
COP
 5.33~13.9
Heating Capacity A15/W38
 1.8~3.7kW
Power Consumption
 0.3~1.2kW
COP
 3.01~5.6
Heating Capacity A-10/W38
 3kW
COP
 1.6
Maximum Power
 1.8kW
Voltage
 230v
Noise Level (10m)
 <32dB(A)
Refrigerant
 R32
Water Connections
 1″ male / 32-38mm
Nominal Flow
 2.31 m³/h
Dimensions (L x W x H)
 600mm x 390mm x 423mm
Weight
 32Kg

What is COP?

COP stands for Coefficient of Performance

COP is quoted as a number, such as 5

For each kW of energy input, 5 x kW would be output

The higher the output, the lower the running costs

Installation

Connections

All models are fitted with a mains cable, RCD and plug as standard, making them suitable for outdoor sockets.

Water inlet and outlet connections are 1 inch / 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The IceSpa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

The IceSpa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Your Poolex IceSpa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the IceSpa should be disconnected and stored in a shed or garage if not in use for extended periods.

Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs

We Are Rated Excellent on TrustPilot

Poolex IceSpa 5kW Inverter Heat Pump for Spas and Hot Tubs

£1,399 £1,165.83 + vat

Not in stock Please contact us for lead time

Payment methods

Payment methods we accept

Become a Poolstar Stockist

This product is ONLY available to Pool and Spa trade customers.

For more information on the full Poolstar pool, spa and wellness range or to speak to us about becoming a stockist please call 01284 658770 or email our sales team.

We are proud to be the official UK & Ireland Poolstar distribution partner.

Download the Poolstar 2025-2026 Catalogue - pdf (73Mb)

Sales and technical help

Not sure what product is right for your application? Need help selecting the right model?

Our sales and service teams are available Monday to Friday, 9am to 5pm

01284 658770

Mon - Fri 9am - 5pm (you can leave a message out-of-hours)

Product code: 109649 Categories: , Tag:

Product description

The IceSpa is a plug & play full Inverter heat pump for spas especially designed for cold climates, at -10°C air and 38°C water temperature, heat output is still 3kW thanks to the EVI (Enhanced Vapour Injection) compressor. In fact with a COP of 2, even at -10°C, the IceSpa is two times cheaper than the electric heater to run.

EVI (Enhanced Vapour Injection) improves the energy efficiency of refrigeration and air conditioning systems by injecting additional vapor into the compressor at low temperatures. It is thanks to this innovative technology that the IceSpa is able to perform so well in extreme weather conditions.

Operating down to -25°C, you can heat up your spa or hot tub in the middle of winter, the Full Inverter technology will reduce your energy consumption up to 75% at an equivalent power consumption compared to an electric heater.

Easy to install, the IceSpa is compatible with all hot tubs and connects itself as easily. Ideal for swim spas and Nordic baths, this heat pump will exceed your expectations.

The IceSpa features a remote colour touchscreen that can be detached from the unit (wired) and also Wi-Fi temperature control and a programmable timer using the Smart Life App, available for iOS and Android smart devices.

Key features

The power of Full Inverter & EVI efficiency right down to -25°C

Integrated remote colour touchscreen can be removed from the unit (wired)

Up to 5.38kW of heat output at air temperature of 26°C and water temperature of 26°C

Up to 3.7kW of heat output at air temperature of 15°C, water temperature of 38°C

Up to 3kW of heat output at air temperature of -10°C, water temperature of 38°C

Can be installed on any spa, hot tub, swim spa, or Nordic bath (size dependent)

Operates down to -25°C, automatic de-icing

Reversible hot/cold for ultimate flexibility, can be used to heat or cool

Heating range from 10 – 40°C, cooling range from 8 – 28°C

Wi-Fi for easy remote control via the dedicated Poolex app, available for both iOS and Android smartphones

Plug and play – comes with mains cable and RCD

32/38mm hose tail water connections, pipes, and other fittings not supplied

Integrated control of the spa / hot tub heater and/or auxiliary heat pump (relay/s optional)

R32 Refrigerant

Supplied with RCD mains cable, anti-vibration pads, 32/38mm hose tails, 2 x hose clips and winter cover

Three-year parts warranty, seven-year parts (total) on compressor, and 15-year corrosion (total) on Titanium coil

Downloads

Specifications

Heating Capacity A26/W26
 2.5~5.38kW
Power Consumption
 0.2~1kW
COP
 5.33~13.9
Heating Capacity A15/W38
 1.8~3.7kW
Power Consumption
 0.3~1.2kW
COP
 3.01~5.6
Heating Capacity A-10/W38
 3kW
COP
 1.6
Maximum Power
 1.8kW
Voltage
 230v
Noise Level (10m)
 <32dB(A)
Refrigerant
 R32
Water Connections
 1″ male / 32-38mm
Nominal Flow
 2.31 m³/h
Dimensions (L x W x H)
 600mm x 390mm x 423mm
Weight
 32Kg

What is COP?

COP stands for Coefficient of Performance

COP is quoted as a number, such as 5

For each kW of energy input, 5 x kW would be output

The higher the output, the lower the running costs

Installation

Connections

All models are fitted with a mains cable, RCD and plug as standard, making them suitable for outdoor sockets.

Water inlet and outlet connections are 1 inch / 32-38mm, two hose tails are supplied as standard, however you may require additional hose and fittings to connect to your spa or hot tub. The IceSpa should be connected after your spa’s circulation pump and heater, the use of a bypass kit (normally made up of 2 x T-pieces and 3 x ball valves) is recommended.

Supplied with RCD mains cable, anti-vibration pads, 2 x 1″ / 32-38mm hose tails, 2 x hose clips and winter cover

The IceSpa heat pump features built-in Wi-Fi connectivity as standard (requires Wi-Fi network with suitable signal strength) and can be controlled from your smartphone. The ‘Smart Life’ App is available for both iOS and Android smartphones.

Your Poolex IceSpa heat pump should always be installed outside, restrictions on air flow around a heat pump such as dense vegetation or solid surfaces such as sheds, fences or walls will lead to a drop in efficiency and heating ability, it especially important that cooled air can be properly dispersed away from the unit.

While the casing provides protection from the weather, the IceSpa should be disconnected and stored in a shed or garage if not in use for extended periods.

Over 1,000 reasons why customers choose us

We have over 1,000 five star reviews on TrustPilot, below is some of our most recent customer feedback.

You can trust us when we say we care about the service we provide both before and after your purchase, there are hundreds more five star reviews from happy customers on our Trustpilot page.
We have over 1,000 reviews on Trustpilot - read our customer reviews

Read our TrustPilot reviews

★ ★ ★ ★ ★

Excellent products and service

Richard Linstead (organic review)

AES and Simon have been consistently excellent – both in terms of the products they’ve supplied and the service during and after fulfilment. They’re all also genuinely nice people and I strongly recommend them.

★ ★ ★ ★ ★

AES have been fantastic

David Brear (verified purchase)

AES have been fantastic. From helping me get the right thing to helping me make sure I get the most from it! Very very helpful. Highly recommend.

★ ★ ★ ★ ★

Fantastic support

ZSteen (verified purchase)

Fantastic support before, during and after our purchase. Simon was very helpful recommended what we needed for our current setup, and even after when we were having a few teething issues he was always on hand to assist.

★ ★ ★ ★ ★

Helpful and informed

Graham Chester (verified purchase)

Nick was very helpful in sorting out a query we had about a pool bypass kit and how to install the kit. Sent us a diagram by email following a useful telephone conversation. We have now installed a bypass kit and are delighted it’s fully working. Thank you for your help.

★ ★ ★ ★ ★

Great Service

Paul Thompson (verified purchase)

Great service from the outset. Communication was spot on, and the engineers that attended were informative and pleasant. Can't fault anything from start to finish.