Key features
DTRON is DAB’s new line of electronic on/off submersible pumps for water pressurisation in residential environments
Suitable for water boosting, gardening & irrigation, rainwater and groundwater reuse and supply (tanks only)
WRAS approved (pending) for drinking water
7 inch submersible multistage pump with carry handle
Integrated expansion vessel improves the airtightness of the system, prevents pump from restarting unnecessarily, provides protection against water hammer and extends the life of the pump
NFC (Near Field Communication) permits use of pumps with float switch (supplied separately), the float switch can be attached without the need for removal of the pump body
Com Box allows you to change the pump’s pressure settings and view any alarms. PLC (Power Line Communication) allows the use of the Com Box via the pump power cable so no additional wires are required
Bleeding valve permits immediate priming upon initial installation and guarantees correct operation of the pump at all times
Optional DOC68 allows pump to be used as an IP68 certified surface pump for indoor or outdoor use
Compatible with DConnect Box 2 which allows access to the DAB cloud service. With the DConnect App, you can manage and monitor the pressure of the system, the alarms and the availability of water in the tank (requires optional NFC water level measurement sensor) from your smartphone or tablet
The modular components of the pump make it easier to perform maintenance. The parts can be removed, repaired and replaced separately, simplifying the resolution of any issues and reducing maintenance costs
Two year warranty
Downloads
Specifications (.pdf)
Manual (.pdf)
Brochure (.pdf)
Specifications
Model |
35/90 |
Operation |
Electronic on/off |
Flowrate Max. |
90 L/min |
Head Max. |
35m |
Impeller Type |
Multistage |
Horse Power (P2 nominal) |
0.7 HP |
Power (P2 nominal) |
0.52 kW |
Voltage |
230V |
Water Temp Max. |
50°C |
Discharge Size |
1¼ inch |
Free Passage |
20mm |
Pumped Medium |
Clean water |
Cable Length |
10m |
Construction |
TECHNOPOLYMER |
Weight |
11.6 Kg |
Dimensions (H x W) |
611mm x 185mm |
Model |
35/120 |
Operation |
Electronic on/off |
Flowrate Max. |
120 L/min |
Head Max. |
35m |
Impeller Type |
Multistage |
Horse Power (P2 nominal) |
0.8 HP |
Power (P2 nominal) |
0.6 kW |
Voltage |
230V |
Water Temp Max. |
50°C |
Discharge Size |
1¼ inch |
Free Passage |
20mm |
Pumped Medium |
Clean water |
Cable Length |
10m |
Construction |
TECHNOPOLYMER |
Weight |
11.6 Kg |
Dimensions (H x W) |
611mm x 185mm |
Model |
45/90 |
Operation |
Electronic on/off |
Flowrate Max. |
90 L/min |
Head Max. |
45m |
Impeller Type |
Multistage |
Horse Power (P2 nominal) |
0.8 HP |
Power (P2 nominal) |
0.6 kW |
Voltage |
230V |
Water Temp Max. |
50°C |
Discharge Size |
1¼ inch |
Free Passage |
20mm |
Pumped Medium |
Clean water |
Cable Length |
10m |
Construction |
TECHNOPOLYMER |
Weight |
11.6 Kg |
Dimensions (H x W) |
611mm x 185mm |
Technical data
Flow rate maximum: 7,5 m³/h
Head up to: 45 m
Maximum immersion depth: 7/12 m
Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
Free passage: 2 mm
Minimum suction depth: 110 mm
Minimum level of water: 35 mm
Liquid temperature range: from +0°C to +50°C
Minimum and maximum ambient temperature: <0°C / +50°C
Maximum immersion depth: 15 m
Set cut-in: 2,4 bar (±0,2)
Flanges, thread: Thread 1¼ inch
Pump maximum diameter: 185 mm
Impeller/s material: Technopolymer/ AISI 304 stainless steel
Maximum number of starts: 60/h
Non-stop service: yes
Protection class: IP 68
Motor insulation class: F
Power cable (m) and plug: 10/15 m with plug
Single phase power input: 230 V 50 Hz
Installation: Fixed, horizontal or vertical. Submerged or semi-submerged. It can be installed on the surface, under the water level, or outside in a vertical position with the DOC68 accessory (supplied separately)