How much sand?
FSF350 |
25Kg |
1 x 25Kg Bag |
FSF400 |
35Kg |
2 x 25Kg Bags |
FSF450 |
45Kg |
2 x 25Kg Bags |
FSF500 |
85Kg |
4 x 25Kg Bags |
Key features
Easy installation with pre-installed plumbing system and base
Simple operation with six-way top mounted multi-port valve
Choice of four filter tanks from 14 inch to 20 inch with matched pumps to suit pools from 20m³ to 60m³
Sand size 0.5 – 0.8mm
Maximum operating pressure 2.5 bar
Pump fitted with UK plug, please note that the socket must be protected by an RCD
1½ inch / 50mm Stepped Glue Connections (please note that for pipe measurement, Imperial = Internal Bore and Metric = Outside Diameter)
Downloads
Specifications (.pdf)
Manual (.pdf)
Specifications
Flowrate Max. |
72 L/min (4.32m³/h) |
Size |
14 inch (350mm) |
Pump Size |
0.33 HP |
Height |
680mm |
Sand Required |
20 Kg |
Bags of sand |
1 |
Estimated Pool Size |
20m³ / 6,600 gallons |
Connections |
1½ inch / 50mm |
Pump |
SS033 |
Flowrate Max. |
108 L/min (6.48m³/h) |
Size |
16 inch (400mm) |
Pump Size |
0.5 HP |
Height |
759mm |
Sand Required |
35 Kg |
Bags of sand |
2 |
Estimated Pool Size |
30m³ / 8,800 gallons |
Connections |
1½ inch / 50mm |
Pump |
SS050 |
Flowrate Max. |
135 L/min (8.10m³/h) |
Size |
18 inch (450mm) |
Pump Size |
0.75 HP |
Height |
813mm |
Sand Required |
45 Kg |
Bags of sand |
2 |
Estimated Pool Size |
40m³ / 13,200 gallons |
Connections |
1½ inch / 50mm |
Pump |
SS075 |
Flowrate Max. |
185 L/min (11.10m³/h) |
Size |
21 inch (500mm) |
Pump Size |
1.0 HP |
Height |
856mm |
Sand Required |
85 Kg |
Bags of sand |
4 |
Estimated Pool Size |
60m³ / 15,800 gallons |
Connections |
1½ inch / 50mm |
Pump |
SC100 |
Filter size guide
<20m³ |
14 inch / 0.33HP |
20-30m³ |
16 inch / 0.50HP |
30-40m³ |
18 inch / 0.75HP |
40-60m³ |
21 inch / 1.0HP |
60-80m³ |
25 inch / 1.5HP |
80-100m³ |
28 inch / 1.5HP |
Filter media
We also stock filter sand for our filter sets, the recommended size of sand is 0.5 to 0.8 mm, sand is supplied in 25Kg bags, please refer to the specifications for the number of bags required for each filter.
Filter sand is a specific grade, please do not use builders’ sand or play sand as this may block or damage your filter.
Replacing an existing filter
If you are replacing a filter that forms part of an existing system then your replacement should match the size of the existing filter.
For example if you already have a 21 inch filter and 1.0HP pump on a 20m³ pool then you would still need 21 inch filter, alternatively you would need to replace both the pump and filter with a smaller selection as per our filter size guide.
Operation
The easy to use six-way top mounted multi-port valve lets you select any of the operations with a simple lever action, the functions of the multi-port valve are filtration, waste, closed, backwash, rinse and recirculating.
Please note you must shut off the power to your pool pump before changing the position of the multi-port valve, failure to do may result in the multi-port valve being damaged.
One year warranty
Remora brand is exclusive to Automated Environmental Systems