Full Bore High Flow Fire Hydrant - DN80 Flange
Full Bore High Flow Fire Hydrant - DN80 Flange
Product code: 13396 Category: Tag:

About this product

Our full bore high flow fire hydrant is the same size as a squat hydrant but has a full, straight bore from inlet to outlet. This allows a greatly enhanced flow-rate and allows the easy use of pipe maintenance and measurement equipment.

The clearway underground hydrant is suitable for use with water and neutral liquids to a maximum temperature of +70°C, and complies with requirements of BS 750:2012 and BS EN1074-1:2000 and EN 14339:2005, underground hydrants. Also to BS EN 1074-6 for potable water.

The hydrant is also resistant to corrosion of other component parts, and resistant to disinfection products.

Key features

Through bore. Bore Dimension full 80mm diameter with outlet removed

Exceeds flow requirements: Min flow 2000 l/min @1.7 Bar (Kv=92): specified in BSEN14339 Actual flow: Kv= 157

Fully maintainable in situ

Ductile iron construction

Universal drilled inlet flange BS EN 1092:PN10/16, BS 10 Table D/E

Patent Pending

Stem drive – Stem cap in accordance with BS 750/ BS 5163-2

Ductile iron coated with WRAS approved epoxy coating Blue RAL 5017, to 250 microns min, Holiday free in accordance with WIS 04-52-01

Type 2c. Screwed down type with screwed 2½ inch round thread outlet

Autofrost valve as standard

Downloads

Service Conditions

Maximum Working Pressure: 16 Bar

Temperature Range: -10°C to +70°C

Insulation essential for temperatures of 0°C and below

Standards

BSI Kite marked to BS 750:2012

Complies with Annex ZA of BS EN 14339 in respect of Construction Products Directive (CPR)

WRAS approved (materials only)

Outlet connectors – BS 336 to UK

For potable water systems EN 1074-6:2004

Corrosion resistant construction and relevant components coated in accordance with WIS-4-52-01

BS EN 1074 – 6 for disinfection products

Test/Approvals

Hydraulic test to BS 750 Seat: 1.1 x PN. Body: 1.5 x PN. Operating torque test

Resistance to operating load – MOT – 105NM – MST – 210NM

Draining – Volume of retained water 12ml after 4 minutes

Hydraulic characteristics – Kv = 92 minimum 2000 l/min @ 1.7 Bar

Product code: 13396 Category: Tag:

Full Bore High Flow Fire Hydrant – DN80 Flange

Full Bore High Flow Fire Hydrant - DN80 Flange
Product code: 13396 Category: Tag:

About this product

Our full bore high flow fire hydrant is the same size as a squat hydrant but has a full, straight bore from inlet to outlet. This allows a greatly enhanced flow-rate and allows the easy use of pipe maintenance and measurement equipment.

The clearway underground hydrant is suitable for use with water and neutral liquids to a maximum temperature of +70°C, and complies with requirements of BS 750:2012 and BS EN1074-1:2000 and EN 14339:2005, underground hydrants. Also to BS EN 1074-6 for potable water.

The hydrant is also resistant to corrosion of other component parts, and resistant to disinfection products.

Key features

Through bore. Bore Dimension full 80mm diameter with outlet removed

Exceeds flow requirements: Min flow 2000 l/min @1.7 Bar (Kv=92): specified in BSEN14339 Actual flow: Kv= 157

Fully maintainable in situ

Ductile iron construction

Universal drilled inlet flange BS EN 1092:PN10/16, BS 10 Table D/E

Patent Pending

Stem drive – Stem cap in accordance with BS 750/ BS 5163-2

Ductile iron coated with WRAS approved epoxy coating Blue RAL 5017, to 250 microns min, Holiday free in accordance with WIS 04-52-01

Type 2c. Screwed down type with screwed 2½ inch round thread outlet

Autofrost valve as standard

Downloads

Service Conditions

Maximum Working Pressure: 16 Bar

Temperature Range: -10°C to +70°C

Insulation essential for temperatures of 0°C and below

Standards

BSI Kite marked to BS 750:2012

Complies with Annex ZA of BS EN 14339 in respect of Construction Products Directive (CPR)

WRAS approved (materials only)

Outlet connectors – BS 336 to UK

For potable water systems EN 1074-6:2004

Corrosion resistant construction and relevant components coated in accordance with WIS-4-52-01

BS EN 1074 – 6 for disinfection products

Test/Approvals

Hydraulic test to BS 750 Seat: 1.1 x PN. Body: 1.5 x PN. Operating torque test

Resistance to operating load – MOT – 105NM – MST – 210NM

Draining – Volume of retained water 12ml after 4 minutes

Hydraulic characteristics – Kv = 92 minimum 2000 l/min @ 1.7 Bar

Product code: 13396 Category: Tag:

Full Bore High Flow Fire Hydrant – DN80 Flange

Product code: 13396 Category: Tag:

Full Bore High Flow Fire Hydrant – DN80 Flange

£690 £575 + vat

Not in stock onlinePlease contact us for lead time

Payment methods we accept

Free next working day delivery over £300

Wholesale enquiries

If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.

We are proud to be the official UK & Ireland Poolstar distribution partner.

View the Poolstar 2025-2026 Catalogue - pdf (73Mb)

Sales and technical help

Our sales team is more than happy to advise with product selection, wholesale enquiries and provide technical advice.

While our servicing team is on hand to help with servicing and after sales.

01284 658770

Mon to Fri 9am to 5pm /out-of-hours voicemail

Product code: 13396 Category: Tag:

About this product

Our full bore high flow fire hydrant is the same size as a squat hydrant but has a full, straight bore from inlet to outlet. This allows a greatly enhanced flow-rate and allows the easy use of pipe maintenance and measurement equipment.

The clearway underground hydrant is suitable for use with water and neutral liquids to a maximum temperature of +70°C, and complies with requirements of BS 750:2012 and BS EN1074-1:2000 and EN 14339:2005, underground hydrants. Also to BS EN 1074-6 for potable water.

The hydrant is also resistant to corrosion of other component parts, and resistant to disinfection products.

Key features

Through bore. Bore Dimension full 80mm diameter with outlet removed

Exceeds flow requirements: Min flow 2000 l/min @1.7 Bar (Kv=92): specified in BSEN14339 Actual flow: Kv= 157

Fully maintainable in situ

Ductile iron construction

Universal drilled inlet flange BS EN 1092:PN10/16, BS 10 Table D/E

Patent Pending

Stem drive – Stem cap in accordance with BS 750/ BS 5163-2

Ductile iron coated with WRAS approved epoxy coating Blue RAL 5017, to 250 microns min, Holiday free in accordance with WIS 04-52-01

Type 2c. Screwed down type with screwed 2½ inch round thread outlet

Autofrost valve as standard

Downloads

Service Conditions

Maximum Working Pressure: 16 Bar

Temperature Range: -10°C to +70°C

Insulation essential for temperatures of 0°C and below

Standards

BSI Kite marked to BS 750:2012

Complies with Annex ZA of BS EN 14339 in respect of Construction Products Directive (CPR)

WRAS approved (materials only)

Outlet connectors – BS 336 to UK

For potable water systems EN 1074-6:2004

Corrosion resistant construction and relevant components coated in accordance with WIS-4-52-01

BS EN 1074 – 6 for disinfection products

Test/Approvals

Hydraulic test to BS 750 Seat: 1.1 x PN. Body: 1.5 x PN. Operating torque test

Resistance to operating load – MOT – 105NM – MST – 210NM

Draining – Volume of retained water 12ml after 4 minutes

Hydraulic characteristics – Kv = 92 minimum 2000 l/min @ 1.7 Bar