Product code: 40847 Category: Tag:

About this product

The AG Utility pumping range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed.

The Utility range is designed for areas where the floor space is not restricted. This range caters for a wider variation of tank options to suit a wider range of applications.

The AG Utility features either a 500, 750 or 1,000 litre break tank manufactured from non-corrosive WRAS approved material and is available with a fixed or variable speed controller and a 3 or 8 litre pressure vessel. There is alsoa variable speed twin pump option on all sizes of tank. The unit requires minimal installation and comes complete with a 2 metre mains cable with fitted 13A plug.

Key features

Non-corrosive holding tank (WRAS approved material)

Pre-fitted WRAS approved fill valve

Protective lid enclosure as standard

Minimal installation required

Adjustable digital display flow controller

Dry run protection with auto restart (time delay)

AF Air gap

Suitable up to Fluid Category 4

Inlet – ½ inch BSP / outlet – 1 inch BSP / overflow – 1¼ inch / drain off – 1 inch BSP

Downloads

Specifications

Power supply
240v, 50Hz
Power
0.55 kW, 0.75 HP
Flow (max.)
80 l/min
Head (max.)
42m
Controller
Presflo Multi with integral 3ltr pressure vessel
Current Input
3.4A
Mains Power Cable
2m x 1mm² 3 core fitted with 13A fuse main plug
Tank Weight Empty
500ltr = 34 kg | 750ltr = 49 kg | 1,000ltr = 74kg
Tank Weight Full
1L = 1Kg plus weight of empty tank
Access Cover
285mm
Power supply
240v, 50Hz
Power
0.55 kW, 0.75 HP
Flow (max.)
80 l/min
Head (max.)
63m
Controller
Steadypres M/T 07 supplied with 8ltr pressure vessel
Current Input
4A
Mains Power Cable
2m x 1mm² 3 core fitted with 13A fuse main plug
Tank Weight Empty
500ltr = 40 kg | 750ltr = 55 kg | 1,000ltr = 80kg
Tank Weight Full
1L = 1Kg plus weight of empty tank
Access Cover
285mm

Speed Explained

Fixed

This is the most economic option and will transform the water pressure and flow in your property. This will deliver the full pressure of the pump at the in use flow rate.

Variable

The variable speed option allows you to choose your desired pressure and then leave the AES AG unit to control the pump to make sure it delivers this, speeding up and slowing down to suit demand.

Whatever you are doing, from washing up, watering the garden, having a shower or all three together the pressure will continue to be the same to give you a constant pressure at every outlet.

Variable Twin

The twin pump option can be added to any of the larger tanks (500L+) and basically does exactly that, adds an extra pump into the tank.

This gives you twice the amount of flow at the same pressure, as well as an option to have the pumps running on duty standby basis, or as two individual duty pumps (e.g. if you wanted to run two separate circuits).

Air Gaps Explained

Tanks with a Type AB Air gap with rectangular weir overflow are suitable for Fluid Category 5. This means they can be used for applications where increased backflow protection is required.

Application examples include Butchery and meat trades / WC pans, urinals and bidets / Hospital dialysis machines / Vegetable washing / Laboratories / Grey water-recycling systems / Dish washing and washing machines in healthcare premises / Water storage for agricultural purposes.

Tanks with a Type AF Air gap with circular overflow are suitable for Fluid Category 4.

Application examples include Water in primary circuits and heating systems / Domestic wash basins, baths & showers / Domestic clothes and dish washing machines / Food preparation / Bottle washing apparatus / Irrigation outlets / Brewery and distillation plant / Commercial dish washing machines / Domestic clothes and washing machines when used in commercial premises.

Product code: 40847 Category: Tag:

AG Utility Cold Water Booster Set

Product code: 40847 Category: Tag:

About this product

The AG Utility pumping range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed.

The Utility range is designed for areas where the floor space is not restricted. This range caters for a wider variation of tank options to suit a wider range of applications.

The AG Utility features either a 500, 750 or 1,000 litre break tank manufactured from non-corrosive WRAS approved material and is available with a fixed or variable speed controller and a 3 or 8 litre pressure vessel. There is alsoa variable speed twin pump option on all sizes of tank. The unit requires minimal installation and comes complete with a 2 metre mains cable with fitted 13A plug.

Key features

Non-corrosive holding tank (WRAS approved material)

Pre-fitted WRAS approved fill valve

Protective lid enclosure as standard

Minimal installation required

Adjustable digital display flow controller

Dry run protection with auto restart (time delay)

AF Air gap

Suitable up to Fluid Category 4

Inlet – ½ inch BSP / outlet – 1 inch BSP / overflow – 1¼ inch / drain off – 1 inch BSP

Downloads

Specifications

Power supply
240v, 50Hz
Power
0.55 kW, 0.75 HP
Flow (max.)
80 l/min
Head (max.)
42m
Controller
Presflo Multi with integral 3ltr pressure vessel
Current Input
3.4A
Mains Power Cable
2m x 1mm² 3 core fitted with 13A fuse main plug
Tank Weight Empty
500ltr = 34 kg | 750ltr = 49 kg | 1,000ltr = 74kg
Tank Weight Full
1L = 1Kg plus weight of empty tank
Access Cover
285mm
Power supply
240v, 50Hz
Power
0.55 kW, 0.75 HP
Flow (max.)
80 l/min
Head (max.)
63m
Controller
Steadypres M/T 07 supplied with 8ltr pressure vessel
Current Input
4A
Mains Power Cable
2m x 1mm² 3 core fitted with 13A fuse main plug
Tank Weight Empty
500ltr = 40 kg | 750ltr = 55 kg | 1,000ltr = 80kg
Tank Weight Full
1L = 1Kg plus weight of empty tank
Access Cover
285mm

Speed Explained

Fixed

This is the most economic option and will transform the water pressure and flow in your property. This will deliver the full pressure of the pump at the in use flow rate.

Variable

The variable speed option allows you to choose your desired pressure and then leave the AES AG unit to control the pump to make sure it delivers this, speeding up and slowing down to suit demand.

Whatever you are doing, from washing up, watering the garden, having a shower or all three together the pressure will continue to be the same to give you a constant pressure at every outlet.

Variable Twin

The twin pump option can be added to any of the larger tanks (500L+) and basically does exactly that, adds an extra pump into the tank.

This gives you twice the amount of flow at the same pressure, as well as an option to have the pumps running on duty standby basis, or as two individual duty pumps (e.g. if you wanted to run two separate circuits).

Air Gaps Explained

Tanks with a Type AB Air gap with rectangular weir overflow are suitable for Fluid Category 5. This means they can be used for applications where increased backflow protection is required.

Application examples include Butchery and meat trades / WC pans, urinals and bidets / Hospital dialysis machines / Vegetable washing / Laboratories / Grey water-recycling systems / Dish washing and washing machines in healthcare premises / Water storage for agricultural purposes.

Tanks with a Type AF Air gap with circular overflow are suitable for Fluid Category 4.

Application examples include Water in primary circuits and heating systems / Domestic wash basins, baths & showers / Domestic clothes and dish washing machines / Food preparation / Bottle washing apparatus / Irrigation outlets / Brewery and distillation plant / Commercial dish washing machines / Domestic clothes and washing machines when used in commercial premises.

Product code: 40847 Category: Tag:

AG Utility Cold Water Booster Set

Product code: 40847 Category: Tag:

AG Utility Cold Water Booster Set

Payment methods we accept

Next working day delivery availableIn-stock items only, order by 2pm Mon to Fri

Wholesale enquiries

If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.

We are proud to be the official UK & Ireland Poolstar distribution partner.

View the Poolstar 2025-2026 Catalogue - pdf (73Mb)

Sales and technical help

Our sales team is more than happy to advise with product selection, wholesale enquiries and provide technical advice.

While our servicing team is on hand to help with servicing and after sales.

01284 658770

Mon to Fri 9am to 5pm /out-of-hours voicemail

Product code: 40847 Category: Tag:

About this product

The AG Utility pumping range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed.

The Utility range is designed for areas where the floor space is not restricted. This range caters for a wider variation of tank options to suit a wider range of applications.

The AG Utility features either a 500, 750 or 1,000 litre break tank manufactured from non-corrosive WRAS approved material and is available with a fixed or variable speed controller and a 3 or 8 litre pressure vessel. There is alsoa variable speed twin pump option on all sizes of tank. The unit requires minimal installation and comes complete with a 2 metre mains cable with fitted 13A plug.

Key features

Non-corrosive holding tank (WRAS approved material)

Pre-fitted WRAS approved fill valve

Protective lid enclosure as standard

Minimal installation required

Adjustable digital display flow controller

Dry run protection with auto restart (time delay)

AF Air gap

Suitable up to Fluid Category 4

Inlet – ½ inch BSP / outlet – 1 inch BSP / overflow – 1¼ inch / drain off – 1 inch BSP

Downloads

Specifications

Power supply
240v, 50Hz
Power
0.55 kW, 0.75 HP
Flow (max.)
80 l/min
Head (max.)
42m
Controller
Presflo Multi with integral 3ltr pressure vessel
Current Input
3.4A
Mains Power Cable
2m x 1mm² 3 core fitted with 13A fuse main plug
Tank Weight Empty
500ltr = 34 kg | 750ltr = 49 kg | 1,000ltr = 74kg
Tank Weight Full
1L = 1Kg plus weight of empty tank
Access Cover
285mm
Power supply
240v, 50Hz
Power
0.55 kW, 0.75 HP
Flow (max.)
80 l/min
Head (max.)
63m
Controller
Steadypres M/T 07 supplied with 8ltr pressure vessel
Current Input
4A
Mains Power Cable
2m x 1mm² 3 core fitted with 13A fuse main plug
Tank Weight Empty
500ltr = 40 kg | 750ltr = 55 kg | 1,000ltr = 80kg
Tank Weight Full
1L = 1Kg plus weight of empty tank
Access Cover
285mm

Speed Explained

Fixed

This is the most economic option and will transform the water pressure and flow in your property. This will deliver the full pressure of the pump at the in use flow rate.

Variable

The variable speed option allows you to choose your desired pressure and then leave the AES AG unit to control the pump to make sure it delivers this, speeding up and slowing down to suit demand.

Whatever you are doing, from washing up, watering the garden, having a shower or all three together the pressure will continue to be the same to give you a constant pressure at every outlet.

Variable Twin

The twin pump option can be added to any of the larger tanks (500L+) and basically does exactly that, adds an extra pump into the tank.

This gives you twice the amount of flow at the same pressure, as well as an option to have the pumps running on duty standby basis, or as two individual duty pumps (e.g. if you wanted to run two separate circuits).

Air Gaps Explained

Tanks with a Type AB Air gap with rectangular weir overflow are suitable for Fluid Category 5. This means they can be used for applications where increased backflow protection is required.

Application examples include Butchery and meat trades / WC pans, urinals and bidets / Hospital dialysis machines / Vegetable washing / Laboratories / Grey water-recycling systems / Dish washing and washing machines in healthcare premises / Water storage for agricultural purposes.

Tanks with a Type AF Air gap with circular overflow are suitable for Fluid Category 4.

Application examples include Water in primary circuits and heating systems / Domestic wash basins, baths & showers / Domestic clothes and dish washing machines / Food preparation / Bottle washing apparatus / Irrigation outlets / Brewery and distillation plant / Commercial dish washing machines / Domestic clothes and washing machines when used in commercial premises.