ABS Sanimax MF154 Lifting Station
ABS Sanimax Lifting Station Pump Curves
ABS Sanimax MF154 Lifting Station
ABS Sanimax Lifting Station Pump Curves
Product code: 47402 Category: Tag:

Overview

The ABS Sanimax MF324 lifting station is a compact wastewater pumping unit for floor-level installation featuring an MF324 submersible pump with 30mm solids handling.

The Sanimax MF324 can be used for pumping wastewater including washing machines, sinks, showers and bathtubs (not sewage) from buildings and areas below the sewer level in accordance with EN 12050-2.

The Sanimax MF324 features a synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-2. Supplied as standard with MF324 pump, automatic level control and non-return valve.

Key features

Compact triangular design optimises space beneath a sink

Fitted with MF324 pump with solids handling up to 30mm

Wastewater pumping from washing machines, sinks, showers and bathtubs

Complete with non-return valve and automatic level control – a separate check valve should be used at heads over 5m (3m on hot water version)

Seven ports (5 x 40mm, 2 x 50mm), ready-prepared with seals, which can be used for inflow, discharge, power cable, or flexible hose connection to a washing machine (¾ inch adaptor supplied)

Easy to transport, with simple discharge line connection

Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection

Tank capacity 28 litres

3m or 10m HO7RN-F mains cable – ready-for-use, plug-in unit with Schuko plug

For Sanimax MF we recommend that the lower ports should not be used because the switch-on level is higher than the inflow level

Downloads

Technical data

Synthetic, corrosion-resistant, gas- and odour-tight tank, in
accordance with EN 12050-2

Supplied as standard with pump, automatic level control and non-return valve

Maximum allowable temperature of medium 40°C; short term to 60°C (max. 5 minutes)

Capacity: 28 litres

Motor: Water pressure sealed, squirrel cage 2-pole induction motor,
with double shaft seals and oil chamber (MF version)

Electronic monitoring of stator temperature and overcurrent

Insulation: Class B (130 ºC) for Robusta, Class F (155 ºC) for MF

Protection type: IP68

Product code: 47402 Category: Tag:

ABS Sanimax MF324 Lifting Station

ABS Sanimax MF154 Lifting Station
ABS Sanimax Lifting Station Pump Curves
ABS Sanimax MF154 Lifting Station
ABS Sanimax Lifting Station Pump Curves
Product code: 47402 Category: Tag:

Overview

The ABS Sanimax MF324 lifting station is a compact wastewater pumping unit for floor-level installation featuring an MF324 submersible pump with 30mm solids handling.

The Sanimax MF324 can be used for pumping wastewater including washing machines, sinks, showers and bathtubs (not sewage) from buildings and areas below the sewer level in accordance with EN 12050-2.

The Sanimax MF324 features a synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-2. Supplied as standard with MF324 pump, automatic level control and non-return valve.

Product code: 47402 Category: Tag:

ABS Sanimax MF324 Lifting Station

Product code: 47402 Category: Tag:

ABS Sanimax MF324 Lifting Station

Payment methods we accept

We are rated Excellent on TrustpilotOver 1,100 five star reviews from happy customers

Next working day delivery availableIn-stock items, order by 2pm Mon to Fri

Wholesale enquiries

If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.

We are proud to be the official UK & Ireland Poolstar distribution partner.

View the Poolstar 2025-2026 Catalogue - pdf (73Mb)
Payment methods we accept

We are rated Excellent on TrustpilotOver 1,100 five star reviews from happy customers

Next working day delivery availableIn-stock items only, order by 2pm Mon to Fri

Wholesale enquiries

If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.

We are proud to be the official UK & Ireland Poolstar distribution partner.

View the Poolstar 2025-2026 Catalogue - pdf (73Mb)

Sales and technical help

Our sales team is more than happy to advise with product selection, wholesale enquiries and provide technical advice.

While our servicing team is on hand to help with servicing and after sales.

01284 658770

Mon to Fri 9am to 5pm /out-of-hours voicemail

Product code: 47402 Category: Tag:

Overview

The ABS Sanimax MF324 lifting station is a compact wastewater pumping unit for floor-level installation featuring an MF324 submersible pump with 30mm solids handling.

The Sanimax MF324 can be used for pumping wastewater including washing machines, sinks, showers and bathtubs (not sewage) from buildings and areas below the sewer level in accordance with EN 12050-2.

The Sanimax MF324 features a synthetic, corrosion-resistant, gas- and odour-tight tank, in accordance with EN 12050-2. Supplied as standard with MF324 pump, automatic level control and non-return valve.

Key features

Compact triangular design optimises space beneath a sink

Fitted with MF324 pump with solids handling up to 30mm

Wastewater pumping from washing machines, sinks, showers and bathtubs

Complete with non-return valve and automatic level control – a separate check valve should be used at heads over 5m (3m on hot water version)

Seven ports (5 x 40mm, 2 x 50mm), ready-prepared with seals, which can be used for inflow, discharge, power cable, or flexible hose connection to a washing machine (¾ inch adaptor supplied)

Easy to transport, with simple discharge line connection

Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection

Tank capacity 28 litres

3m or 10m HO7RN-F mains cable – ready-for-use, plug-in unit with Schuko plug

For Sanimax MF we recommend that the lower ports should not be used because the switch-on level is higher than the inflow level

Downloads

Technical data

Synthetic, corrosion-resistant, gas- and odour-tight tank, in
accordance with EN 12050-2

Supplied as standard with pump, automatic level control and non-return valve

Maximum allowable temperature of medium 40°C; short term to 60°C (max. 5 minutes)

Capacity: 28 litres

Motor: Water pressure sealed, squirrel cage 2-pole induction motor,
with double shaft seals and oil chamber (MF version)

Electronic monitoring of stator temperature and overcurrent

Insulation: Class B (130 ºC) for Robusta, Class F (155 ºC) for MF

Protection type: IP68

Key features

Compact triangular design optimises space beneath a sink

Fitted with MF324 pump with solids handling up to 30mm

Wastewater pumping from washing machines, sinks, showers and bathtubs

Complete with non-return valve and automatic level control – a separate check valve should be used at heads over 5m (3m on hot water version)

Seven ports (5 x 40mm, 2 x 50mm), ready-prepared with seals, which can be used for inflow, discharge, power cable, or flexible hose connection to a washing machine (¾ inch adaptor supplied)

Easy to transport, with simple discharge line connection

Odour-tight lid with odour lock and venting, including charcoal odour filter and overflow protection

Tank capacity 28 litres

3m or 10m HO7RN-F mains cable – ready-for-use, plug-in unit with Schuko plug

For Sanimax MF we recommend that the lower ports should not be used because the switch-on level is higher than the inflow level

Downloads

Technical data

Synthetic, corrosion-resistant, gas- and odour-tight tank, in
accordance with EN 12050-2

Supplied as standard with pump, automatic level control and non-return valve

Maximum allowable temperature of medium 40°C; short term to 60°C (max. 5 minutes)

Capacity: 28 litres

Motor: Water pressure sealed, squirrel cage 2-pole induction motor,
with double shaft seals and oil chamber (MF version)

Electronic monitoring of stator temperature and overcurrent

Insulation: Class B (130 ºC) for Robusta, Class F (155 ºC) for MF

Protection type: IP68