Designed and engineered with specialised functions for complete pool maintenance, AquaSense 2 delivers unparalleled professional cleaning that's just not possible with standard cleaners.
Our below ground 1.0 metre diameter packaged pumping station with dual guide rail is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with claws which allows the pumps to slide up and down the guide rails, the weight of the pumps forms the discharge connections when the pumps are lowered on to the pedestal bases.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
Our pumping stations are formed of a premium quality polyethylene tank and submersible sewage pumps, the depth of the tank needed will be dependent on the invert level and storage required.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover is available as an optional extra.
Wet wipes and sanitary items block pumps and pipes, don’t flush them, bin them
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
Product highlights
1.0 metre width polyethylene tank (depths up to 2.5m)
Choice of tank depths; 1.0m (860 litre capacity), 1.5m (1,175 litre capacity), 2.0m (1,550 litre capacity) and 2.5m (1,950 litre capacity)
Dual guide rail system including pedestal base and pump claw
2 inch or 2½ inch discharge, supplied with internal pipework and finished with tank connector for connection to external discharge pipework
Non return valve and gate valve fitted into internal pipework
Mounted vortex pumps with up to 75mm free solids passage
Submersible pumps (230v or 400v) with up to 966 litre per minute flow rate and up to 9.7m lift (please note the pump can be upgraded to suit requirements, ask for details)
Automatic operation – included control panel with alarm and float switches
Supplied with two 110mm seal for inlet hole to be cut on site, additional inlet seals available on request
Our below ground 1.0 metre diameter packaged pumping station with dual guide rail is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with claws which allows the pumps to slide up and down the guide rails, the weight of the pumps forms the discharge connections when the pumps are lowered on to the pedestal bases.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
Our pumping stations are formed of a premium quality polyethylene tank and submersible sewage pumps, the depth of the tank needed will be dependent on the invert level and storage required.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover is available as an optional extra.
Wet wipes and sanitary items block pumps and pipes, don’t flush them, bin them
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
1.0 Metre Diameter Pumping Station with Dual Guide Rails
We are rated Excellent on TrustpilotOver 1,100 five star reviews from happy customers
Next working day delivery availableIn-stock items, order by 2pm Mon to Fri
Wholesale enquiries
If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.
We are proud to be the official UK & Ireland Poolstar distribution partner.
We are rated Excellent on TrustpilotOver 1,100 five star reviews from happy customers
Next working day delivery availableIn-stock items only, order by 2pm Mon to Fri
Wholesale enquiries
If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.
We are proud to be the official UK & Ireland Poolstar distribution partner.
Our below ground 1.0 metre diameter packaged pumping station with dual guide rail is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with claws which allows the pumps to slide up and down the guide rails, the weight of the pumps forms the discharge connections when the pumps are lowered on to the pedestal bases.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
Our pumping stations are formed of a premium quality polyethylene tank and submersible sewage pumps, the depth of the tank needed will be dependent on the invert level and storage required.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover is available as an optional extra.
Wet wipes and sanitary items block pumps and pipes, don’t flush them, bin them
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
Product highlights
1.0 metre width polyethylene tank (depths up to 2.5m)
Choice of tank depths; 1.0m (860 litre capacity), 1.5m (1,175 litre capacity), 2.0m (1,550 litre capacity) and 2.5m (1,950 litre capacity)
Dual guide rail system including pedestal base and pump claw
2 inch or 2½ inch discharge, supplied with internal pipework and finished with tank connector for connection to external discharge pipework
Non return valve and gate valve fitted into internal pipework
Mounted vortex pumps with up to 75mm free solids passage
Submersible pumps (230v or 400v) with up to 966 litre per minute flow rate and up to 9.7m lift (please note the pump can be upgraded to suit requirements, ask for details)
Automatic operation – included control panel with alarm and float switches
Supplied with two 110mm seal for inlet hole to be cut on site, additional inlet seals available on request
Pedestal, upper bracket, guide rails and claw for mounting pump
Internal Pipework
Rigid Pipework
Non-return Valves
2
Gate Valves
1
Float Switches
3/4
Float Switch Bracket
Included
Control Panel with Alarm
Included
110mm Inlet Pipe Seals
2
Manhole Cover
Optional
Kiosk
Optional
MDPE Pipe
Optional
Compression Fitting
Optional
Product highlights
1.0 metre width polyethylene tank (depths up to 2.5m)
Choice of tank depths; 1.0m (860 litre capacity), 1.5m (1,175 litre capacity), 2.0m (1,550 litre capacity) and 2.5m (1,950 litre capacity)
Dual guide rail system including pedestal base and pump claw
2 inch or 2½ inch discharge, supplied with internal pipework and finished with tank connector for connection to external discharge pipework
Non return valve and gate valve fitted into internal pipework
Mounted vortex pumps with up to 75mm free solids passage
Submersible pumps (230v or 400v) with up to 966 litre per minute flow rate and up to 9.7m lift (please note the pump can be upgraded to suit requirements, ask for details)
Automatic operation – included control panel with alarm and float switches
Supplied with two 110mm seal for inlet hole to be cut on site, additional inlet seals available on request
