Designed and engineered with specialised functions for complete pool maintenance, AquaSense 2 delivers unparalleled professional cleaning that's just not possible with standard cleaners.
Our 1.8 metre diameter pumping station with dual guide rails is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with a claw which allows the pump to slide up and down the guide rail, the weight of the pump forms the discharge connections when the pump is lowered on to the pedestal base.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover can be supplied according to your requirements.
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
Our service team will contact you before your first service is due to arrange an ongoing maintenance schedule with you.
Dual guide rail system including pedestal bases and pump claws
2 inch, 2½ inch, 3 inch or 4 inch discharge, supplied with internal pipework and finished with tank connector for connection to external discharge pipework
Non return valve and gate valve fitted into internal pipework
Mounted vortex pumps with up to 100mm free solids passage
Submersible pumps (230v or 400v) with up to 1,620 litre per minute flow rate and up to 11.3m lift (please note the pumps can be upgraded to suit requirements, ask for details)
Automatic operation – included control panel with alarm and float switches
Supplied with two 110mm seal for inlet hole to be cut on site, additional inlet seals available on request
Pedestals, upper brackets, guide rails and claws for mounting pump
Internal Pipework
Rigid Pipework
Non-return Valves
2
Gate Valves
1
Float Switches
3/4
Float Switch Bracket
Included
Control Panel with Alarm
Included
110mm Inlet Pipe Seals
2
Manhole Cover
Optional
Kiosk
Optional
MDPE Pipe
Optional
Compression Fitting
Optional
Automatic operation
Each packaged pumping station is supplied with submersible sewage pumps with separate control panel and float switches to provide automatic operation. All of the submersible pumps we supply with our pumping stations are selected for their performance and reliability. Submersible pumps are available in single and three phase.
A control panel and floats are provided as standard to ensure that there is no excess build-up in the event of pump failure, the most common cause of pump failure is a foreign object in the tank being sucked into the pump and creating a blockage. The control panel has LED indicator lights and an audible alarm to alert the user in event of a problem.
Our control panels allow the attached pumps to work in duty standby and duty assist modes, this prevents a single pump from operating continuously and ensures that both pumps are used evenly, it also means that should the duty pump struggle to empty the tank due to the volume of liquid entering the tank, the other pump will automatically activate to assist.
Discharge pipework
We stock coils of MDPE discharge pipework in 25m, 50m and 100m lengths (not all discharge pipe is available in all lengths), and we also supply compression fittings to connect the MDPE pipe to the discharge connector on the tank.
Product Description
Our 1.8 metre diameter pumping station with dual guide rails is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with a claw which allows the pump to slide up and down the guide rail, the weight of the pump forms the discharge connections when the pump is lowered on to the pedestal base.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover can be supplied according to your requirements.
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
Our service team will contact you before your first service is due to arrange an ongoing maintenance schedule with you.
1.8 Metre Diameter Pumping Station with Dual Guide Rails
Product description
Our 1.8 metre diameter pumping station with dual guide rails is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with a claw which allows the pump to slide up and down the guide rail, the weight of the pump forms the discharge connections when the pump is lowered on to the pedestal base.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover can be supplied according to your requirements.
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
Our service team will contact you before your first service is due to arrange an ongoing maintenance schedule with you.
Dual guide rail system including pedestal bases and pump claws
2 inch, 2½ inch, 3 inch or 4 inch discharge, supplied with internal pipework and finished with tank connector for connection to external discharge pipework
Non return valve and gate valve fitted into internal pipework
Mounted vortex pumps with up to 100mm free solids passage
Submersible pumps (230v or 400v) with up to 1,620 litre per minute flow rate and up to 11.3m lift (please note the pumps can be upgraded to suit requirements, ask for details)
Automatic operation – included control panel with alarm and float switches
Supplied with two 110mm seal for inlet hole to be cut on site, additional inlet seals available on request
Pedestals, upper brackets, guide rails and claws for mounting pump
Internal Pipework
Rigid Pipework
Non-return Valves
2
Gate Valves
1
Float Switches
3/4
Float Switch Bracket
Included
Control Panel with Alarm
Included
110mm Inlet Pipe Seals
2
Manhole Cover
Optional
Kiosk
Optional
MDPE Pipe
Optional
Compression Fitting
Optional
Automatic operation
Each packaged pumping station is supplied with submersible sewage pumps with separate control panel and float switches to provide automatic operation. All of the submersible pumps we supply with our pumping stations are selected for their performance and reliability. Submersible pumps are available in single and three phase.
A control panel and floats are provided as standard to ensure that there is no excess build-up in the event of pump failure, the most common cause of pump failure is a foreign object in the tank being sucked into the pump and creating a blockage. The control panel has LED indicator lights and an audible alarm to alert the user in event of a problem.
Our control panels allow the attached pumps to work in duty standby and duty assist modes, this prevents a single pump from operating continuously and ensures that both pumps are used evenly, it also means that should the duty pump struggle to empty the tank due to the volume of liquid entering the tank, the other pump will automatically activate to assist.
Discharge pipework
We stock coils of MDPE discharge pipework in 25m, 50m and 100m lengths (not all discharge pipe is available in all lengths), and we also supply compression fittings to connect the MDPE pipe to the discharge connector on the tank.
1.8 Metre Diameter Pumping Station with Dual Guide Rails
1.8 Metre Diameter Pumping Station with Dual Guide Rails
POA
Payment methods
Wholesale enquiries
Interested in becoming a reseller of Poolex pool products, Holl's saunas or NetSpa inflatable spas? Talk to our sales team on 01284 658770 or email us.
We are proud to be the official UK & Ireland Poolstar distribution partner.
Our 1.8 metre diameter pumping station with dual guide rails is designed for the transfer of sewage and waste water from domestic and commercial properties where connection to the mains drain is not possible.
The guide rail system consists of two sets of galvanised steel rails inside the tank which run between the pedestal bases at the bottom of the tank and the upper guide rail brackets at the top of the tank.
The pumps are fitted with a claw which allows the pump to slide up and down the guide rail, the weight of the pump forms the discharge connections when the pump is lowered on to the pedestal base.
The pumps come with lifting chains, which means they can be quickly and easily removed for maintenance, completely eliminating the need to drain the tank and physically uncouple the connections.
All internal pipework including non-return valves comes pre-assembled and connected inside the tank. We also supply as standard two 110mm rubber grommets for the inlet pipes. A manhole cover can be supplied according to your requirements.
We recommend that all pumping stations purchased from us are serviced regularly to ensure that all pumps, pipework, valves and control equipment are kept in full working order.
Our service team will contact you before your first service is due to arrange an ongoing maintenance schedule with you.
Dual guide rail system including pedestal bases and pump claws
2 inch, 2½ inch, 3 inch or 4 inch discharge, supplied with internal pipework and finished with tank connector for connection to external discharge pipework
Non return valve and gate valve fitted into internal pipework
Mounted vortex pumps with up to 100mm free solids passage
Submersible pumps (230v or 400v) with up to 1,620 litre per minute flow rate and up to 11.3m lift (please note the pumps can be upgraded to suit requirements, ask for details)
Automatic operation – included control panel with alarm and float switches
Supplied with two 110mm seal for inlet hole to be cut on site, additional inlet seals available on request
Pedestals, upper brackets, guide rails and claws for mounting pump
Internal Pipework
Rigid Pipework
Non-return Valves
2
Gate Valves
1
Float Switches
3/4
Float Switch Bracket
Included
Control Panel with Alarm
Included
110mm Inlet Pipe Seals
2
Manhole Cover
Optional
Kiosk
Optional
MDPE Pipe
Optional
Compression Fitting
Optional
Automatic operation
Each packaged pumping station is supplied with submersible sewage pumps with separate control panel and float switches to provide automatic operation. All of the submersible pumps we supply with our pumping stations are selected for their performance and reliability. Submersible pumps are available in single and three phase.
A control panel and floats are provided as standard to ensure that there is no excess build-up in the event of pump failure, the most common cause of pump failure is a foreign object in the tank being sucked into the pump and creating a blockage. The control panel has LED indicator lights and an audible alarm to alert the user in event of a problem.
Our control panels allow the attached pumps to work in duty standby and duty assist modes, this prevents a single pump from operating continuously and ensures that both pumps are used evenly, it also means that should the duty pump struggle to empty the tank due to the volume of liquid entering the tank, the other pump will automatically activate to assist.
Discharge pipework
We stock coils of MDPE discharge pipework in 25m, 50m and 100m lengths (not all discharge pipe is available in all lengths), and we also supply compression fittings to connect the MDPE pipe to the discharge connector on the tank.
Over 1,100 reasons why customers choose us
We have over 1,000 five star reviews on TrustPilot, below is some of our most recent customer feedback.
You can trust us when we say we care about the service we provide both before and after your purchase, there are hundreds more five star reviews from happy customers on our Trustpilot page.
