Pool heat pump sizing | Next working day delivery from £7.80 | Pump station maintenance | Click & collect from Bury St Edmunds | Rated excellent on TrustPilot
We are rated excellent on Trustpilot

Hydro-Pro Dehumidifier Type P

Hydro-Pro Dehumidifier Type P

The Hydro-Pro Dehumidifier Type P absorbs moist air from your pool room and transforms it into warm, dry air.

The Type P dehumidifiers include a defrost function to prevent icing when temperature is below 10°C, and an electric heater to raise the pool room temperature two degrees above the water temperature which reduces evaporation.

The Hydro-Pro Dehumidifier is an essential partner with heat pumps on indoor pools. Installing a dehumidifier allows you to enjoy swimming in a comfortable environment without problems such as wall condensation, corrosion and water damage.

The Type P Dehumidifier is controlled by a built-in hygrostat set on one side of the unit (underneath right side) and the target relative humidity (RH) value can be set from 30% to 90%. The unit will not start to dehumidify until the actual RH is beyond the setting value.

It is recommended that an external hygrostat should also be installed to ensure a constant measure of the humidity in your pool area.

Key features

High efficiency

Defrost (below 10°C) and air heating function

Super silent running at 44dB

Epoxy fin air exchanger is featured for excellent anti-corrosion performance

Ultra-thin front casing – only 6.5cm wide

Modern glass fronted casing with touch control panel

Floor or wall mounted – Stainless Steel wall mounting included

Humidistat included – automatic shut-off when humidity level drops below 50%

Relative humidity 40-90%

Maximum pool area 20m²

Maximum pool house area 85m²

Maximum dehumidification capacity 108 litres per day

Downloads

What is a dehumidifier?

Even when you cannot see it, moisture in the form of water vapour is all around us in the air. The humidity in the air, if not controlled, will cause corrosion, mould and bacteria growth. When left unchecked, moisture damage in swimming pool buildings causes major structural damage.

The Hydro-Pro Dehumidifier works by drawing moist air over a refrigerated coil with a small fan. The cold coil of the refrigeration device condenses the water, which is removed, then the air is reheated by the hot coil, returning warmer and drier air back to your pool room.

Product specifications

Rated Capacity
 2.2 L/h
Dehumidification Capacity
 53L
Pool Area (Max.)
 10m²
Pool Room Area (Max.)
 45m²
Noise Level
 44 dB(A)
Voltage
 220-240V
Input Power
 0.892 kW
Running Current
 4.0A
Power Input (Max.)
 0.949 kW
Running Current (Max.)
 4.3A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1295mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Rated Capacity
 3.5 L/h
Dehumidification Capacity
 84L
Pool Area (Max.)
 15m²
Pool Room Area (Max.)
 60m²
Noise Level
 44 dB(A)
Voltage
 220-240V
Input Power
 1.095 kW
Running Current
 5.0A
Power Input (Max.)
 1.300 kW
Running Current (Max.)
 5.9A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1495mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Rated Capacity
 4.5 L/h
Dehumidification Capacity
 108L
Pool Area (Max.)
 20m²
Pool Room Area (Max.)
 85m²
Noise Level
 46 dB(A)
Voltage
 220-240V
Input Power
 1.950 kW
Running Current
 8.8A
Power Input (Max.)
 2.300 kW
Running Current (Max.)
 10A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1695mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm

Product Description

The Hydro-Pro Dehumidifier Type P absorbs moist air from your pool room and transforms it into warm, dry air.

The Type P dehumidifiers include a defrost function to prevent icing when temperature is below 10°C, and an electric heater to raise the pool room temperature two degrees above the water temperature which reduces evaporation.

The Hydro-Pro Dehumidifier is an essential partner with heat pumps on indoor pools. Installing a dehumidifier allows you to enjoy swimming in a comfortable environment without problems such as wall condensation, corrosion and water damage.

The Type P Dehumidifier is controlled by a built-in hygrostat set on one side of the unit (underneath right side) and the target relative humidity (RH) value can be set from 30% to 90%. The unit will not start to dehumidify until the actual RH is beyond the setting value.

It is recommended that an external hygrostat should also be installed to ensure a constant measure of the humidity in your pool area.

Hydro-Pro Dehumidifier Type P

Hydro-Pro Dehumidifier Type P
Hydro-Pro Dehumidifier Type P
Hydro-Pro Dehumidifier Type P
Hydro-Pro Dehumidifier Type P

Hydro-Pro Dehumidifier Type P

Hydro-Pro Dehumidifier Type P
Hydro-Pro Dehumidifier Type P
Hydro-Pro Dehumidifier Type P
Hydro-Pro Dehumidifier Type P

The Hydro-Pro Dehumidifier Type P absorbs moist air from your pool room and transforms it into warm, dry air.

The Type P dehumidifiers include a defrost function to prevent icing when temperature is below 10°C, and an electric heater to raise the pool room temperature two degrees above the water temperature which reduces evaporation.

The Hydro-Pro Dehumidifier is an essential partner with heat pumps on indoor pools. Installing a dehumidifier allows you to enjoy swimming in a comfortable environment without problems such as wall condensation, corrosion and water damage.

The Type P Dehumidifier is controlled by a built-in hygrostat set on one side of the unit (underneath right side) and the target relative humidity (RH) value can be set from 30% to 90%. The unit will not start to dehumidify until the actual RH is beyond the setting value.

It is recommended that an external hygrostat should also be installed to ensure a constant measure of the humidity in your pool area.

Key features

High efficiency

Defrost (below 10°C) and air heating function

Super silent running at 44dB

Epoxy fin air exchanger is featured for excellent anti-corrosion performance

Ultra-thin front casing – only 6.5cm wide

Modern glass fronted casing with touch control panel

Floor or wall mounted – Stainless Steel wall mounting included

Humidistat included – automatic shut-off when humidity level drops below 50%

Relative humidity 40-90%

Maximum pool area 20m²

Maximum pool house area 85m²

Maximum dehumidification capacity 108 litres per day

Downloads

What is a dehumidifier?

Even when you cannot see it, moisture in the form of water vapour is all around us in the air. The humidity in the air, if not controlled, will cause corrosion, mould and bacteria growth. When left unchecked, moisture damage in swimming pool buildings causes major structural damage.

The Hydro-Pro Dehumidifier works by drawing moist air over a refrigerated coil with a small fan. The cold coil of the refrigeration device condenses the water, which is removed, then the air is reheated by the hot coil, returning warmer and drier air back to your pool room.

Product specifications

Rated Capacity
 2.2 L/h
Dehumidification Capacity
 53L
Pool Area (Max.)
 10m²
Pool Room Area (Max.)
 45m²
Noise Level
 44 dB(A)
Voltage
 220-240V
Input Power
 0.892 kW
Running Current
 4.0A
Power Input (Max.)
 0.949 kW
Running Current (Max.)
 4.3A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1295mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Rated Capacity
 3.5 L/h
Dehumidification Capacity
 84L
Pool Area (Max.)
 15m²
Pool Room Area (Max.)
 60m²
Noise Level
 44 dB(A)
Voltage
 220-240V
Input Power
 1.095 kW
Running Current
 5.0A
Power Input (Max.)
 1.300 kW
Running Current (Max.)
 5.9A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1495mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Rated Capacity
 4.5 L/h
Dehumidification Capacity
 108L
Pool Area (Max.)
 20m²
Pool Room Area (Max.)
 85m²
Noise Level
 46 dB(A)
Voltage
 220-240V
Input Power
 1.950 kW
Running Current
 8.8A
Power Input (Max.)
 2.300 kW
Running Current (Max.)
 10A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1695mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Product code: 64079 Category: Tag:

Delivery & collection

Small UK Mainland (under £100) - from next working day £7.80

Standard UK Mainland (under £300) - from next working day £12

Free UK Mainland (over £300) - from next working day

Channel Islands and Isle of Man £70 (3-4 days)

Isle of Wight £30 (2 days)

Lower Highlands £30 (2 days)

Upper Highlands (mainland) £30 (3-4 days)

Scottish Offshore £35 (5-7 days)

Need it in a hurry? You can order online and pick up your item(s) for FREE.

If it's in stock, you can pick it up the same day.

Collect from our Bury St Edmunds warehouse, Mon to Fri 9am to 5pm

Large and/or heavy items are dispatched on pallets

ALL heat pumps are dispatched on pallets

Delivery is to kerbside via lorry with tail lift

Pallet deliveries must be signed for

Parked cars, overhanging trees and narrow roads can prevent lorry access - please notify us of known access restrictions PRIOR to delivery

For full details see our delivery page

The Hydro-Pro Dehumidifier Type P absorbs moist air from your pool room and transforms it into warm, dry air.

The Type P dehumidifiers include a defrost function to prevent icing when temperature is below 10°C, and an electric heater to raise the pool room temperature two degrees above the water temperature which reduces evaporation.

The Hydro-Pro Dehumidifier is an essential partner with heat pumps on indoor pools. Installing a dehumidifier allows you to enjoy swimming in a comfortable environment without problems such as wall condensation, corrosion and water damage.

The Type P Dehumidifier is controlled by a built-in hygrostat set on one side of the unit (underneath right side) and the target relative humidity (RH) value can be set from 30% to 90%. The unit will not start to dehumidify until the actual RH is beyond the setting value.

It is recommended that an external hygrostat should also be installed to ensure a constant measure of the humidity in your pool area.

Key features

High efficiency

Defrost (below 10°C) and air heating function

Super silent running at 44dB

Epoxy fin air exchanger is featured for excellent anti-corrosion performance

Ultra-thin front casing – only 6.5cm wide

Modern glass fronted casing with touch control panel

Floor or wall mounted – Stainless Steel wall mounting included

Humidistat included – automatic shut-off when humidity level drops below 50%

Relative humidity 40-90%

Maximum pool area 20m²

Maximum pool house area 85m²

Maximum dehumidification capacity 108 litres per day

Downloads

What is a dehumidifier?

Even when you cannot see it, moisture in the form of water vapour is all around us in the air. The humidity in the air, if not controlled, will cause corrosion, mould and bacteria growth. When left unchecked, moisture damage in swimming pool buildings causes major structural damage.

The Hydro-Pro Dehumidifier works by drawing moist air over a refrigerated coil with a small fan. The cold coil of the refrigeration device condenses the water, which is removed, then the air is reheated by the hot coil, returning warmer and drier air back to your pool room.

Product specifications

Rated Capacity
 2.2 L/h
Dehumidification Capacity
 53L
Pool Area (Max.)
 10m²
Pool Room Area (Max.)
 45m²
Noise Level
 44 dB(A)
Voltage
 220-240V
Input Power
 0.892 kW
Running Current
 4.0A
Power Input (Max.)
 0.949 kW
Running Current (Max.)
 4.3A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1295mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Rated Capacity
 3.5 L/h
Dehumidification Capacity
 84L
Pool Area (Max.)
 15m²
Pool Room Area (Max.)
 60m²
Noise Level
 44 dB(A)
Voltage
 220-240V
Input Power
 1.095 kW
Running Current
 5.0A
Power Input (Max.)
 1.300 kW
Running Current (Max.)
 5.9A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1495mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
Rated Capacity
 4.5 L/h
Dehumidification Capacity
 108L
Pool Area (Max.)
 20m²
Pool Room Area (Max.)
 85m²
Noise Level
 46 dB(A)
Voltage
 220-240V
Input Power
 1.950 kW
Running Current
 8.8A
Power Input (Max.)
 2.300 kW
Running Current (Max.)
 10A
Relative Humidity
 40-90%
Temperature
 10-32°C
Dimensions (L x W x H}
 1695mm x 202mm x 647mm
Refrigerant
 R32
Condensation Pipe Diameter
 16mm
We use cookies to offer you a better browsing experience and to allow third parties to customise the marketing content you see across websites and social media
More info Accept