Designed and engineered with specialised functions for complete pool maintenance, AquaSense 2 delivers unparalleled professional cleaning that's just not possible with standard cleaners.
Our Direct Feed Rainwater Harvesting System comprises a unique flat shallow dig tank, which comes supplied as a kit to supply rainwater for flushing toilets and light watering of gardens. The system allows you to collect, filter, store and pump your rainwater to flush toilets and supply garden taps.
The supplied control panel will monitor rainwater levels in the tank and provide mains backup if required. Please note that the mains backup will be sufficient for flushing toilets but may not provide sufficient in flow to match garden tap out flow and should be used for light watering duties only.
The unique flat tank can be installed into higher water tables than a standard round tank. The installation depth is 60% less than other rainwater tanks, whilst excavation can be up to 70% less, meaning less earth excavation and less cost.
The tank can be installed without the need for costly concrete bases or back filling, simply site on 100mm of compacted aggregate and back fill with similar material.
Positioning is flexible and each tank comes with a 635mm shaft that can be cut on site to achieve the required invert level. A pedestrian rated manhole cover is provided for the top of the shaft. Steel shaft and cover available on request for use in driveways or other areas where vehicles may need to drive over the tank cover.
Water companies now recommend, and in some cases require the use of black and green HDPE pipe to transfer the collected rainwater to the outlet/s. Each rainwater system comes with a 25m coil of 25mm black and green HDPE pipe as standard.
Key features
Direct feed system provides reclaimed rainwater for flushing toilets and to a garden tap for light watering (tap not supplied, some additional pipework maybe required)
Automatic mains top-up with supplied control panel
Rotationally moulded, one piece tanks, installed without the need for concrete, thereby minimising installation costs and supported by 25 year tank guarantee
Minimum installation depth, can be installed in ground water up to tank shoulder
Installation depth is 60% less than other rainwater tanks due to flat tank, with up to 70% less excavation required
Built in self-cleaning filter, overflow kit and pressure sensitive pump delivers clean rainwater for flushing toilets and supplying a garden tap
External 25mm black and green HDPE pipe included as recommended by water companies
Excavation pit needs to be just 400mm longer and wider than the chosen tank and depth needs to be just 100mm deeper than total height to allow for 100mm aggregate base
Our Direct Feed Rainwater Harvesting System comprises a unique flat shallow dig tank, which comes supplied as a kit to supply rainwater for flushing toilets and light watering of gardens. The system allows you to collect, filter, store and pump your rainwater to flush toilets and supply garden taps.
The supplied control panel will monitor rainwater levels in the tank and provide mains backup if required. Please note that the mains backup will be sufficient for flushing toilets but may not provide sufficient in flow to match garden tap out flow and should be used for light watering duties only.
The unique flat tank can be installed into higher water tables than a standard round tank. The installation depth is 60% less than other rainwater tanks, whilst excavation can be up to 70% less, meaning less earth excavation and less cost.
The tank can be installed without the need for costly concrete bases or back filling, simply site on 100mm of compacted aggregate and back fill with similar material.
Positioning is flexible and each tank comes with a 635mm shaft that can be cut on site to achieve the required invert level. A pedestrian rated manhole cover is provided for the top of the shaft. Steel shaft and cover available on request for use in driveways or other areas where vehicles may need to drive over the tank cover.
Water companies now recommend, and in some cases require the use of black and green HDPE pipe to transfer the collected rainwater to the outlet/s. Each rainwater system comes with a 25m coil of 25mm black and green HDPE pipe as standard.
Key features
Direct feed system provides reclaimed rainwater for flushing toilets and to a garden tap for light watering (tap not supplied, some additional pipework maybe required)
Automatic mains top-up with supplied control panel
Rotationally moulded, one piece tanks, installed without the need for concrete, thereby minimising installation costs and supported by 25 year tank guarantee
Minimum installation depth, can be installed in ground water up to tank shoulder
Installation depth is 60% less than other rainwater tanks due to flat tank, with up to 70% less excavation required
Built in self-cleaning filter, overflow kit and pressure sensitive pump delivers clean rainwater for flushing toilets and supplying a garden tap
External 25mm black and green HDPE pipe included as recommended by water companies
Excavation pit needs to be just 400mm longer and wider than the chosen tank and depth needs to be just 100mm deeper than total height to allow for 100mm aggregate base
Direct Feed Rainwater Harvesting System – Below Ground
Next working day delivery availableIn-stock items only, order by 2pm Mon to Fri
Wholesale enquiries
If you would like more information on our range of Poolstar products, including Poolex Spawer heat pumps, Holl's saunas, NetSpa ice baths and Formidra showers, you can talk to our team on 01284 658770 or send us an email.
We are proud to be the official UK & Ireland Poolstar distribution partner.
Our Direct Feed Rainwater Harvesting System comprises a unique flat shallow dig tank, which comes supplied as a kit to supply rainwater for flushing toilets and light watering of gardens. The system allows you to collect, filter, store and pump your rainwater to flush toilets and supply garden taps.
The supplied control panel will monitor rainwater levels in the tank and provide mains backup if required. Please note that the mains backup will be sufficient for flushing toilets but may not provide sufficient in flow to match garden tap out flow and should be used for light watering duties only.
The unique flat tank can be installed into higher water tables than a standard round tank. The installation depth is 60% less than other rainwater tanks, whilst excavation can be up to 70% less, meaning less earth excavation and less cost.
The tank can be installed without the need for costly concrete bases or back filling, simply site on 100mm of compacted aggregate and back fill with similar material.
Positioning is flexible and each tank comes with a 635mm shaft that can be cut on site to achieve the required invert level. A pedestrian rated manhole cover is provided for the top of the shaft. Steel shaft and cover available on request for use in driveways or other areas where vehicles may need to drive over the tank cover.
Water companies now recommend, and in some cases require the use of black and green HDPE pipe to transfer the collected rainwater to the outlet/s. Each rainwater system comes with a 25m coil of 25mm black and green HDPE pipe as standard.
Key features
Direct feed system provides reclaimed rainwater for flushing toilets and to a garden tap for light watering (tap not supplied, some additional pipework maybe required)
Automatic mains top-up with supplied control panel
Rotationally moulded, one piece tanks, installed without the need for concrete, thereby minimising installation costs and supported by 25 year tank guarantee
Minimum installation depth, can be installed in ground water up to tank shoulder
Installation depth is 60% less than other rainwater tanks due to flat tank, with up to 70% less excavation required
Built in self-cleaning filter, overflow kit and pressure sensitive pump delivers clean rainwater for flushing toilets and supplying a garden tap
External 25mm black and green HDPE pipe included as recommended by water companies
Excavation pit needs to be just 400mm longer and wider than the chosen tank and depth needs to be just 100mm deeper than total height to allow for 100mm aggregate base
