BR Type Float Switch | Rubber Cable with Counter Weight
Product overview
This BR type float switch is designed for a wide range of non-corrosive water based applications, most commonly it is used to monitor water levels in pumping stations to activate our high level alarm in the event of pump failure.
The float chamber is moulded from high-grade polypropylene and features a reliable micro switch and ball arrangement, the float switch comes with a 10M, 20M or 30M rubber/CPE cable and counter weight as standard.
Details
Specifications
Operates by means of an internal ball that actuates a microswitch, switching occurs based on the angle of the float
Float size 103 x 81 x 40mm
Compressive strength of 482 KN/m2
Maximum depth of 20m
Maximum working temperature 80°C
Nominal voltage 220v
Three-core CPE (chlorinated polyethylene) synthetic rubber cable (10m, 20m or 30m)
Wiring Guide
Depending on the application, the guide below indicates which wires would need to be connected to your pump, control panel or high level alarm.
